Skip to main content

Vauxhall VECTRA - 1998

315.8 faults per 100 tests
Year average for all cars of 1998 is 342.9 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Vauxhall VECTRA, model year 1998. Sample size: 186 cars, 374 tests and 1,181 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 186 cars

The 1998 Vauxhall Vectra has an overall defect rate of 316 defects per 100 vehicles, which is 7% lower than the average for cars of the same year. Notably, the Vectra performs better than average in categories such as Steering, Visibility, Body/Structure, and Equipment, showing significant improvements in each area compared to the yearly averages. However, it struggles with "Other" defects, being 47% higher than the average. Additionally, as mileage increases, defect rates rise sharply, particularly in the 124,000+ miles category, where the Vectra shows a considerably higher incidence of defects compared to others in its age group.

Cars by mileage segment

Total: 186 cars

Categories

Brakes
▼ 14.9% worse
171.7 faults / 100 tests
Year avg: 149.4 / 100 tests
  • Brake pipe damaged or excessively corroded
  • Brake hose ferrules: excessively corroded
  • Brake lining or pad: worn below 1.5mm
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Significant brake effort recorded with no brake applied indicating a binding brake
Steering
▲ 37.5% better
16.0 faults / 100 tests
Year avg: 25.6 / 100 tests
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • Power steering pipe, hose or wiring: excessively damaged or corroded
  • A steering ball joint: with excessive wear or free play
  • Power steering fluid leaking or system malfunctioning
  • Excessive radial movement between the top of the steering column and the shaft indicating an excessively worn top bearing
Visibility
▲ 43.0% better
15.0 faults / 100 tests
Year avg: 26.3 / 100 tests
  • Wiper blade: defective
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Wiper blade: missing or obviously not clearing the windscreen
  • Wiper not operating or missing
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
Lights & Electrics
▲ 7.0% better
62.0 faults / 100 tests
Year avg: 66.7 / 100 tests
  • A lens defective: which has no effect on emitted light
  • The aim of a headlamp is not within limits laid down in the requirements
  • Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
  • The aim of a headlamp is not within limits laid down in the requirements
  • Lamp emitted colour, position or intensity not in accordance with the requirements
Wheels & Suspension
▲ 15.4% better
218.2 faults / 100 tests
Year avg: 257.8 / 100 tests
  • A suspension component: excessively damaged or corroded
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A suspension pin, bush, joint or bearing: excessively worn
  • The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
  • A spring: or spring component fractured or seriously weakened
Body/Structure
▲ 38.9% better
49.2 faults / 100 tests
Year avg: 80.5 / 100 tests
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • A transmission shaft constant velocity joint boot: severely deteriorated
  • Exhaust system has a major leak or is insecure
  • Exhaust system has a major leak or is insecure
  • A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
Equipment
▲ 26.5% better
15.0 faults / 100 tests
Year avg: 20.4 / 100 tests
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • Audible warning:
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
Other
▼ 43.2% worse
84.5 faults / 100 tests
Year avg: 59.0 / 100 tests
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Emissions levels exceed default limits
  • Exhaust noise levels in excess of those permitted
  • Emissions levels exceed the manufacturer’s specified limits
  • Lambda coefficient outside the default limits or the range specified by the manufacturer

Fault rate by mileage segment

Model    Year average
0 543 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 138
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 97
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 80
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 69
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 56
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
ADVISORY
Occurrences: 51
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 45
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 36
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 31
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 30

Serious faults (Top 10)

Emissions levels exceed the manufacturer’s specified limits
FAIL
Occurrences: 16
A suspension joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 15
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 14
The aim of a headlamp is not within limits laid down in the requirements
FAIL
Occurrences: 14
Emissions levels exceed default limits
FAIL
Occurrences: 14
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 12
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 11
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 11
is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
FAIL
Occurrences: 10
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 10