Skip to main content

Toyota VERSO - 2015

184.3 faults per 100 tests
Year average for all cars of 2015 is 174.5 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Toyota VERSO, model year 2015. Sample size: 3,164 cars, 6,461 tests and 11,905 recorded faults.
0%
More faults compared to the average car of same model year

Quick summary

Total: 3,164 cars

The 2015 Toyota Verso has an overall defect rate of 184 per 100 vehicles, which is 8% higher than the average for cars of the same year. Notably, the model shows a significant increase in defects as mileage increases, particularly in the higher mileage brackets. In terms of specific categories, the Verso performs better than average in body and structure defects, with a 47% lower rate, but it struggles with brake and electrical issues, showing 27% and 53% higher defect rates respectively. Overall, while the Verso has some strengths, its higher incidence of brakes and electrical faults could be a concern for potential buyers.

Cars by mileage segment

Total: 3,164 cars

Categories

Brakes
▼ 26.2% worse
106.9 faults / 100 tests
Year avg: 84.7 / 100 tests
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Brake disc or drum: significantly and obviously worn
  • Brake lining or pad: worn below 1.5mm
  • Brake lining or pad: worn below 1.5mm
  • Brake pipe damaged or excessively corroded
Steering
▲ 15.2% better
8.4 faults / 100 tests
Year avg: 9.9 / 100 tests
  • Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
  • A steering ball joint: with excessive wear or free play
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • A steering ball joint: with excessive wear or free play
  • Free play in the steering, measured at the rim of the steering wheel is: excessive
Visibility
▼ 5.6% worse
17.0 faults / 100 tests
Year avg: 16.1 / 100 tests
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Wiper blade: missing or obviously not clearing the windscreen
  • Wiper blade: defective
  • Wiper blade: missing or obviously not clearing the windscreen
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
Lights & Electrics
▼ 47.1% worse
45.6 faults / 100 tests
Year avg: 31.0 / 100 tests
  • Lamp emitted colour, position or intensity not in accordance with the requirements
  • Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
  • The aim of a headlamp is not within limits laid down in the requirements
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
  • Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
Wheels & Suspension
▲ 4.2% better
170.8 faults / 100 tests
Year avg: 178.3 / 100 tests
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A spring: or spring component fractured or seriously weakened
  • Tyre tread depth not in accordance with the requirements
  • A suspension pin, bush, joint or bearing: excessively worn
  • A suspension joint dust cover: severely deteriorated
Body/Structure
▲ 51.3% better
5.7 faults / 100 tests
Year avg: 11.7 / 100 tests
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • Exhaust system has a major leak or is insecure
  • A transmission shaft constant velocity joint boot: severely deteriorated
  • A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
  • Body, cab or chassis: excessively corroded at mounting points
Equipment
▲ 0.0% better
4.0 faults / 100 tests
Year avg: 4.0 / 100 tests
  • A seat belt: webbing or flexible stalk significantly stretched or weakened
  • A seat belt: or flexible stalk damaged
  • Audible warning:
  • A seat belt:
  • Seat belt buckle missing, damaged or not functioning as intended
Other
▲ 24.2% better
10.0 faults / 100 tests
Year avg: 13.2 / 100 tests
  • Engine MIL inoperative or indicating a malfunction
  • Engine MIL inoperative or indicating a malfunction
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Engine MIL inoperative or indicating a malfunction
  • Any part of the noise suppression system: insecure

Fault rate by mileage segment

Model    Year average
0 342 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 1,674
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 1,169
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 1,015
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 1,008
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 578
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 527
Brake disc or drum: significantly and obviously worn
ADVISORY
Occurrences: 479
A suspension joint dust cover: severely deteriorated
MINOR
Occurrences: 442
Lamp emitted colour, position or intensity not in accordance with the requirements
ADVISORY
Occurrences: 352
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 227

Serious faults (Top 10)

A suspension joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 157
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 137
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 129
Brake lining or pad: worn below 1.5mm
FAIL
Occurrences: 113
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 104
Wiper blade: missing or obviously not clearing the windscreen
FAIL
Occurrences: 92
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
FAIL
Occurrences: 86
Lamp emitted colour, position or intensity not in accordance with the requirements
FAIL
Occurrences: 70
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 65
Tyre pressure monitoring system malfunctioning or obviously not working
FAIL
Occurrences: 63