Skip to main content

Toyota COROLLA - 1996

287.5 faults per 100 tests
Year average for all cars of 1996 is 337.1 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Toyota COROLLA, model year 1996. Sample size: 185 cars, 377 tests and 1,084 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 185 cars

The 1996 Toyota Corolla has an overall defect rate of 288 defects per 100 vehicles, which is 13% lower than the yearly average of 330 defects. Notably, this model excels in the brakes category, showing a significantly lower defect rate compared to the average. Additionally, it performs well in steering and lights and electrics, with much fewer defects than typical for vehicles of its age. Mileage trends indicate that defect rates increase with higher mileage, particularly in the 124,000+ miles segment, but the Corolla remains more reliable overall than the average vehicle in its class.

Cars by mileage segment

Total: 185 cars

Categories

Brakes
▲ 28.9% better
97.1 faults / 100 tests
Year avg: 136.6 / 100 tests
  • Brake pipe damaged or excessively corroded
  • Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
  • Significant brake effort recorded with no brake applied indicating a binding brake
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Brake lining or pad: worn below 1.5mm
Steering
▲ 94.8% better
1.6 faults / 100 tests
Year avg: 30.8 / 100 tests
  • A steering ball joint: with excessive wear or free play
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • Power steering: inoperative and steering adversely affected
Visibility
▲ 15.6% better
23.3 faults / 100 tests
Year avg: 27.6 / 100 tests
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Wiper blade: defective
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Wiper blade: missing or obviously not clearing the windscreen
  • Wiper blade: missing or obviously not clearing the windscreen
Lights & Electrics
▲ 35.0% better
43.0 faults / 100 tests
Year avg: 66.2 / 100 tests
  • Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
  • A battery insecure: but not likely to fall from carrier
  • Stop lamp(s): all missing or inoperative
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
  • The aim of a headlamp is not within limits laid down in the requirements
Wheels & Suspension
▼ 14.8% worse
269.0 faults / 100 tests
Year avg: 234.4 / 100 tests
  • A suspension pin, bush, joint or bearing: excessively worn
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • Tyre tread depth not in accordance with the requirements
  • The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
  • A suspension component: excessively damaged or corroded
Body/Structure
▲ 11.2% better
76.9 faults / 100 tests
Year avg: 86.6 / 100 tests
  • Body, cab or chassis: excessively corroded at mounting points
  • A transmission shaft constant velocity joint boot: severely deteriorated
  • Exhaust system has a major leak or is insecure
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
Equipment
▲ 22.3% better
20.2 faults / 100 tests
Year avg: 26.0 / 100 tests
  • A seat belt: webbing or flexible stalk significantly stretched or weakened
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • A seat belt:
  • Audible warning:
Other
▲ 33.2% better
44.0 faults / 100 tests
Year avg: 65.9 / 100 tests
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Emissions levels exceed default limits
  • Emissions test unable to be completed
  • Lambda coefficient outside the default limits or the range specified by the manufacturer
  • Emissions levels exceed the manufacturer’s specified limits

Fault rate by mileage segment

Model    Year average
0 536 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 78
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 75
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
ADVISORY
Occurrences: 64
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 52
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 50
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 48
A transmission shaft constant velocity joint boot: severely deteriorated
MINOR
Occurrences: 47
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 43
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 39
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
ADVISORY
Occurrences: 38

Serious faults (Top 10)

The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 29
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 13
A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
FAIL
Occurrences: 12
A shock absorber damaged … or showing signs of severe leakage
FAIL
Occurrences: 11
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 10
Wiper blade: missing or obviously not clearing the windscreen
FAIL
Occurrences: 9
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 8
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 8
Emissions levels exceed default limits
FAIL
Occurrences: 6
Significant brake effort recorded with no brake applied indicating a binding brake
FAIL
Occurrences: 6