Toyota ALPHARD - 2013
85.7 faults per 100 tests
Year average for all cars of 2013 is 221.9 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Toyota ALPHARD, model year 2013.
Sample size: 336 cars, 559 tests and 479 recorded faults.
0%
Less faults compared to the average car of same model year
Less faults compared to the average car of same model year
Quick summary
Total: 336 cars
The 2013 Toyota Alphard exhibits a significantly lower overall defect rate compared to the average car of the same year, with 86 defects per 100 vehicles, which is 61% fewer than the average of 219. The model shows a clear trend of increasing defects with mileage, particularly in the higher mileage categories. Notably, it excels in key areas such as brakes, steering, and visibility, with defect rates substantially lower than the average. Additionally, the Alphard has no recorded defects in equipment, highlighting its reliability in this aspect.
Cars by mileage segment
Total: 336 cars
More model years for Toyota ALPHARD
Other models from Toyota
Categories
Brakes
▲ 84.3% better
15.4 faults / 100 tests
Year avg: 98.4 / 100 tests
- Brake lining or pad: worn below 1.5mm
- Brake disc or drum: significantly and obviously worn
- Brake pipe damaged or excessively corroded
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Parking brake efficiency: below minimum requirement
Steering
▲ 72.1% better
3.6 faults / 100 tests
Year avg: 12.9 / 100 tests
- Free play in the steering, measured at the rim of the steering wheel is: excessive
- Steering rack gaiter or ball joint dust cover: damaged or deteriorated
- A steering ball joint: with excessive wear or free play
Visibility
▲ 80.0% better
3.6 faults / 100 tests
Year avg: 18.0 / 100 tests
- Wiper blade: defective
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- Wiper blade: missing or obviously not clearing the windscreen
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
Lights & Electrics
▲ 25.7% better
37.2 faults / 100 tests
Year avg: 50.1 / 100 tests
- Lamp: multiple light source up to a half not functioning
- Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
- Headlamp reflector or lens: slightly defective
- Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
- A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
Wheels & Suspension
▲ 57.0% better
94.5 faults / 100 tests
Year avg: 219.6 / 100 tests
- Tyre tread depth not in accordance with the requirements
- A shock absorber damaged … or showing signs of severe leakage
- A suspension pin, bush, joint or bearing: excessively worn
- A stub axle swivel pin and/or bush: excessively worn
- A suspension joint dust cover: severely deteriorated
Body/Structure
▲ 73.0% better
5.4 faults / 100 tests
Year avg: 20.0 / 100 tests
- Exhaust system has a major leak or is insecure
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- A transmission shaft constant velocity joint boot: severely deteriorated
- Exhaust system has a major leak or is insecure
- A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
Equipment
▲ 100.0% better
0.0 faults / 100 tests
Year avg: 5.2 / 100 tests
Other
▲ 39.8% better
11.8 faults / 100 tests
Year avg: 19.6 / 100 tests
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- An induction or exhaust leak that could affect emissions levels
- Emissions levels exceed the manufacturer’s specified limits
- Emissions test unable to be completed
- Emissions levels exceed default limits
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 66
A stub axle swivel pin and/or bush: excessively worn
ADVISORY
Occurrences: 41
A shock absorber damaged … or showing signs of severe leakage
ADVISORY
Occurrences: 33
A suspension joint dust cover: severely deteriorated
MINOR
Occurrences: 33
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 24
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 21
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 20
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 18
Lamp: multiple light source up to a half not functioning
MINOR
Occurrences: 13
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
PRS
Occurrences: 13
Serious faults (Top 10)
A suspension joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 12
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 10
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 8
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 6
An obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning
FAIL
Occurrences: 6
Front or rear fog lamp switch:
FAIL
Occurrences: 5
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 4
A headlamp: missing, inoperative or more than ½ not functioning in the case of LED
FAIL
Occurrences: 4
Wiper blade: missing or obviously not clearing the windscreen
FAIL
Occurrences: 3
Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
FAIL
Occurrences: 3