Skip to main content

Seat TOLEDO - 2003

349.8 faults per 100 tests
Year average for all cars of 2003 is 380.4 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Seat TOLEDO, model year 2003. Sample size: 113 cars, 235 tests and 822 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 113 cars

The 2003 SEAT Toledo has an overall defect rate of 350 per 100 vehicles, which is 8% lower than the average for cars of the same year. Notably, the Toledo performs better in the "Other" category, with a defect rate of 40%, compared to the average of 53%. However, it experiences a higher defect rate as mileage increases, particularly in the 93,000–124,000 miles range, where it reaches 513 defects per 100 vehicles. This model shows a relatively consistent performance across different mileage segments, but it may require more attention as it ages, especially beyond 93,000 miles.

Cars by mileage segment

Total: 113 cars

Categories

Brakes
▲ 1.9% better
166.0 faults / 100 tests
Year avg: 169.3 / 100 tests
  • Brake pipe damaged or excessively corroded
  • Brake lining or pad: worn below 1.5mm
  • Significant brake effort recorded with no brake applied indicating a binding brake
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Brake hose ferrules: excessively corroded
Steering
▼ 11.5% worse
28.1 faults / 100 tests
Year avg: 25.2 / 100 tests
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • A steering ball joint: with excessive wear or free play
  • Excessive radial movement between the top of the steering column and the shaft indicating an excessively worn top bearing
  • Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
  • A steering ball joint: with excessive wear or free play
Visibility
▼ 14.1% worse
34.0 faults / 100 tests
Year avg: 29.8 / 100 tests
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Obligatory mirror or device: slightly damaged or loose
  • Wiper blade: missing or obviously not clearing the windscreen
  • Wiper blade: missing or obviously not clearing the windscreen
  • Wiper blade: defective
Lights & Electrics
▲ 18.9% better
83.4 faults / 100 tests
Year avg: 102.8 / 100 tests
  • Stop lamp(s): all missing or inoperative
  • Lamp emitted colour, position or intensity not in accordance with the requirements
  • Headlamp reflector or lens: slightly defective
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
  • Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
Wheels & Suspension
▲ 11.0% better
268.9 faults / 100 tests
Year avg: 302.1 / 100 tests
  • A suspension pin, bush, joint or bearing: excessively worn
  • A suspension component: excessively damaged or corroded
  • Tyre tread depth not in accordance with the requirements
  • A spring: or spring component fractured or seriously weakened
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
Body/Structure
▼ 3.1% worse
67.2 faults / 100 tests
Year avg: 65.2 / 100 tests
  • A transmission shaft constant velocity joint boot: severely deteriorated
  • A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
  • Exhaust system has a major leak or is insecure
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • Exhaust system has a major leak or is insecure
Equipment
▲ 12.5% better
11.9 faults / 100 tests
Year avg: 13.6 / 100 tests
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • ESC MIL indicates a system malfunction
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • A seat belt: or flexible stalk damaged
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
Other
▲ 24.1% better
40.0 faults / 100 tests
Year avg: 52.7 / 100 tests
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Engine MIL inoperative or indicating a malfunction
  • Lambda coefficient outside the default limits or the range specified by the manufacturer
  • Exhaust noise levels in excess of those permitted
  • Emissions levels exceed the manufacturer’s specified limits

Fault rate by mileage segment

Model    Year average
0 538 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 79
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 57
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 49
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 44
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 42
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 36
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 31
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 30
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 28
A transmission shaft constant velocity joint boot: severely deteriorated
MINOR
Occurrences: 18

Serious faults (Top 10)

A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 12
Wiper blade: missing or obviously not clearing the windscreen
FAIL
Occurrences: 9
Stop lamp(s): all missing or inoperative
FAIL
Occurrences: 9
A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
FAIL
Occurrences: 8
Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 7
Parking brake efficiency: below minimum requirement
FAIL
Occurrences: 7
Brake pipe damaged or excessively corroded
FAIL
Occurrences: 6
A spring: or spring component fractured or seriously weakened
FAIL
Occurrences: 6
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 5
Lamp emitted colour, position or intensity not in accordance with the requirements
FAIL
Occurrences: 5