Seat ALHAMBRA - 2007
More faults compared to the average car of same model year
Quick summary
The 2007 SEAT Alhambra has a notably higher overall defect rate of 490 defects per 100 vehicles, which is 39% above the average rate for similar cars of the same year, standing at 352 defects. While it performs better in the "Lights & Electrics" category, showing fewer issues than average, it struggles significantly with defects in categories such as "Steering," "Body/Structure," and "Wheels, Suspensions & Axles," where rates exceed the average by over 50%. Mileage trends indicate that higher mileage vehicles (over 124,000 miles) have a much higher defect rate of nearly 598, suggesting that the model may face increased reliability concerns as it ages. Overall, potential buyers should be cautious, particularly regarding the model's performance in specific mechanical areas.
Cars by mileage segment
More model years for Seat ALHAMBRA
Other models from Seat
Categories
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake lining or pad: worn below 1.5mm
- Parking brake efficiency: below minimum requirement
- Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
- Brake hose ferrules: excessively corroded
- Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
- A steering ball joint: with excessive wear or free play
- A steering ball joint: with excessive wear or free play
- Steering rack gaiter or ball joint dust cover: damaged or deteriorated
- Power steering fluid leaking or system malfunctioning
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
- Wiper blade: defective
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- Obligatory mirror or device: slightly damaged or loose
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
- Stop lamp(s): all missing or inoperative
- Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
- Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
- Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
- Tyre tread depth not in accordance with the requirements
- The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
- A suspension pin, bush, joint or bearing: excessively worn
- A suspension component: excessively damaged or corroded
- The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
- Exhaust system has a major leak or is insecure
- A transmission shaft constant velocity joint boot: severely deteriorated
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- Seat belt buckle missing, damaged or not functioning as intended
- A seat belt: webbing or flexible stalk significantly stretched or weakened
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- An SRS malfunction indicator lamp (MIL) indicates a system malfunction
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- Engine MIL inoperative or indicating a malfunction
- Engine MIL inoperative or indicating a malfunction
- Emissions test unable to be completed
- Smoke opacity levels exceed default limit