Renault CLIO - 1996
277.4 faults per 100 tests
Year average for all cars of 1996 is 337.1 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Renault CLIO, model year 1996.
Sample size: 169 cars, 328 tests and 910 recorded faults.
0%
Less faults compared to the average car of same model year
Less faults compared to the average car of same model year
Quick summary
Total: 169 cars
The 1996 Renault Clio has an overall defect rate of 277 per 100 vehicles, which is 16% lower than the average of 330 defects per 100 vehicles for the same year. Notably, the Clio performs better than average in several categories, including steering, visibility, and lights and electrics, where defect rates are significantly lower. Mileage trends show that defects increase with distance driven, particularly in the 62,000 to 93,000-mile range. Despite these strengths, tyre wear remains a common issue for this model, but it is overshadowed by its overall positive performance in critical safety-related areas.
Cars by mileage segment
Total: 169 cars
Categories
Brakes
▲ 4.5% better
130.5 faults / 100 tests
Year avg: 136.6 / 100 tests
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake pipe damaged or excessively corroded
- Significant brake effort recorded with no brake applied indicating a binding brake
- Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
- Brakes imbalance across an axle such that: the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle. Or in the case of testing on the road, the vehicle deviates excessively from a straight lin
Steering
▲ 48.4% better
15.9 faults / 100 tests
Year avg: 30.8 / 100 tests
- A steering ball joint: with excessive wear or free play
- Power steering pipe, hose or wiring: excessively damaged or corroded
- Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
- Steering rack gaiter or ball joint dust cover: damaged or deteriorated
- A steering ball joint: with excessive wear or free play
Visibility
▲ 33.7% better
18.3 faults / 100 tests
Year avg: 27.6 / 100 tests
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- Wiper blade: defective
- Wiper blade: missing or obviously not clearing the windscreen
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
- Wiper blade: missing or obviously not clearing the windscreen
Lights & Electrics
▲ 53.0% better
31.1 faults / 100 tests
Year avg: 66.2 / 100 tests
- The aim of a headlamp is not within limits laid down in the requirements
- Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
- Beam image obviously incorrect
- Headlamp reflector or lens: slightly defective
- Lamp emitted colour, position or intensity not in accordance with the requirements
Wheels & Suspension
▲ 9.5% better
212.2 faults / 100 tests
Year avg: 234.4 / 100 tests
- Tyre tread depth not in accordance with the requirements
- A suspension component: excessively damaged or corroded
- A suspension pin, bush, joint or bearing: excessively worn
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- A shock absorber damaged … or showing signs of severe leakage
Body/Structure
▲ 26.1% better
64.0 faults / 100 tests
Year avg: 86.6 / 100 tests
- Exhaust system has a major leak or is insecure
- A transmission shaft constant velocity joint boot: severely deteriorated
- An engine mounting or bracket: severely damaged or deteriorated resulting in excessive movement
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- Exhaust system has a major leak or is insecure
Equipment
▲ 60.0% better
10.4 faults / 100 tests
Year avg: 26.0 / 100 tests
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- Audible warning:
- Seat belt buckle missing, damaged or not functioning as intended
- An SRS malfunction indicator lamp (MIL) indicates a system malfunction
- Speedometer: operation impaired
Other
▼ 10.2% worse
72.6 faults / 100 tests
Year avg: 65.9 / 100 tests
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- Emissions levels exceed the manufacturer’s specified limits
- Emissions levels exceed default limits
- Lambda coefficient outside the default limits or the range specified by the manufacturer
- Emissions test unable to be completed
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 83
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 68
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 49
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 45
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 41
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 40
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 38
A shock absorber damaged … or showing signs of severe leakage
ADVISORY
Occurrences: 29
Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
ADVISORY
Occurrences: 28
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 26
Serious faults (Top 10)
Brakes imbalance across an axle such that: the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle. Or in the case of testing on the road, the vehicle deviates excessively from a straight lin
FAIL
Occurrences: 19
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 19
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 13
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 13
Emissions levels exceed the manufacturer’s specified limits
FAIL
Occurrences: 12
Emissions test unable to be completed
FAIL
Occurrences: 11
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 9
Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 9
Exhaust system has a major leak or is insecure
FAIL
Occurrences: 9
Wiper blade: missing or obviously not clearing the windscreen
FAIL
Occurrences: 8