Skip to main content

Porsche 911 - 2006

123.1 faults per 100 tests
Year average for all cars of 2006 is 371.9 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Porsche 911, model year 2006. Sample size: 3,501 cars, 7,847 tests and 9,662 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 3,501 cars

The 2006 Porsche 911 has an overall defect rate of 123 per 100 vehicles, significantly lower than the average of 369 per 100, making it 67% better than its peers. Notably, this model performs exceptionally well in categories such as brakes, steering, and lights, with defects in these areas being much less frequent compared to the average car. While there is a noticeable increase in defects as mileage increases, the Porsche 911 maintains a lower rate across all mileage segments compared to the yearly average. Overall, the data suggests that this model stands out for its reliability, particularly in critical areas like braking and steering.

Cars by mileage segment

Total: 3,501 cars

Categories

Brakes
▲ 47.5% better
80.9 faults / 100 tests
Year avg: 154.1 / 100 tests
  • Brake pipe damaged or excessively corroded
  • Brake pipe damaged or excessively corroded
  • Brake lining or pad: worn below 1.5mm
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Brake hose ferrules: excessively corroded
Steering
▲ 63.4% better
7.4 faults / 100 tests
Year avg: 20.2 / 100 tests
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
  • A steering ball joint: with excessive wear or free play
  • A steering ball joint: with excessive wear or free play
  • Free play in the steering, measured at the rim of the steering wheel is: excessive
Visibility
▲ 58.1% better
11.6 faults / 100 tests
Year avg: 27.7 / 100 tests
  • Wiper blade: defective
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Wiper blade: missing or obviously not clearing the windscreen
  • Obligatory mirror or device: slightly damaged or loose
Lights & Electrics
▲ 86.3% better
15.2 faults / 100 tests
Year avg: 111.1 / 100 tests
  • The aim of a headlamp is not within limits laid down in the requirements
  • Lamp emitted colour, position or intensity not in accordance with the requirements
  • The aim of a headlamp is not within limits laid down in the requirements
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
  • Beam image obviously incorrect
Wheels & Suspension
▲ 68.6% better
98.6 faults / 100 tests
Year avg: 314.5 / 100 tests
  • Tyre tread depth not in accordance with the requirements
  • A suspension pin, bush, joint or bearing: excessively worn
  • A spring: or spring component fractured or seriously weakened
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A shock absorber damaged … or showing signs of severe leakage
Body/Structure
▲ 81.0% better
11.3 faults / 100 tests
Year avg: 59.5 / 100 tests
  • A transmission shaft constant velocity joint boot: severely deteriorated
  • Exhaust system has a major leak or is insecure
  • Exhaust system has a major leak or is insecure
  • A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
Equipment
▲ 83.1% better
2.0 faults / 100 tests
Year avg: 11.8 / 100 tests
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • A seat belt:
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • A seat belt: webbing or flexible stalk significantly stretched or weakened
Other
▲ 56.8% better
19.3 faults / 100 tests
Year avg: 44.7 / 100 tests
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Emissions levels exceed default limits
  • Emissions levels exceed the manufacturer’s specified limits
  • Lambda coefficient outside the default limits or the range specified by the manufacturer
  • Engine MIL inoperative or indicating a malfunction

Fault rate by mileage segment

Model    Year average
0 513 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 1,471
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 1,291
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 1,008
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 845
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 710
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 458
Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
MINOR
Occurrences: 231
A shock absorber damaged … or showing signs of severe leakage
ADVISORY
Occurrences: 171
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 154
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 153

Serious faults (Top 10)

Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 153
Brake pipe damaged or excessively corroded
FAIL
Occurrences: 125
A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
FAIL
Occurrences: 101
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 99
The aim of a headlamp is not within limits laid down in the requirements
FAIL
Occurrences: 96
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 62
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 55
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
FAIL
Occurrences: 49
A spring: or spring component fractured or seriously weakened
FAIL
Occurrences: 38
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 36