Peugeot 4007 - 2011
379.1 faults per 100 tests
Year average for all cars of 2011 is 274.4 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Peugeot 4007, model year 2011.
Sample size: 143 cars, 339 tests and 1,285 recorded faults.
0%
More faults compared to the average car of same model year
More faults compared to the average car of same model year
Quick summary
Total: 143 cars
The 2011 Peugeot 4007 has an overall defect rate of 379 per 100 vehicles, significantly higher than the average of 271 per 100, resulting in a 40% increase in defects compared to similar models. Notably, the vehicle shows an alarming trend in the "Brakes" category, with defects at 228 per 100, which is more than double the average. Additionally, issues with "Steering" and "Wheels, Suspensions & Axles" are also prominent, with defect rates considerably exceeding the average. However, the model performs better than average in the "Body/Structure" category, with a defect rate of 18 compared to the average of 30. Overall, while it excels in body integrity, the Peugeot 4007 demonstrates significant challenges in crucial mechanical systems.
Cars by mileage segment
Total: 143 cars
More model years for Peugeot 4007
Other models from Peugeot
Peugeot 1007
Peugeot 106
Peugeot 107
Peugeot 108
Peugeot 2008
Peugeot 205
Peugeot 206
Peugeot 207
Peugeot 208
Peugeot 3008
Peugeot 306
Peugeot 307
Peugeot 308
Peugeot 4007
Peugeot 406
Peugeot 407
Peugeot 5008
Peugeot 508
Peugeot BIPPER
Peugeot BOXER
Peugeot EXPERT
Peugeot HORIZON
Peugeot PARTNER
Peugeot RCZ
Peugeot RIFTER
Categories
Brakes
▼ 107.7% worse
228.3 faults / 100 tests
Year avg: 109.9 / 100 tests
- Brake pipe damaged or excessively corroded
- Brake lining or pad: worn below 1.5mm
- Significant brake effort recorded with no brake applied indicating a binding brake
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake pipe damaged or excessively corroded
Steering
▼ 165.2% worse
41.9 faults / 100 tests
Year avg: 15.8 / 100 tests
- A steering ball joint: with excessive wear or free play
- A steering ball joint: with excessive wear or free play
- A steering ball joint: with excessive wear or free play
- Steering rack gaiter or ball joint dust cover: damaged or deteriorated
- A steering linkage component: fractured or deformed
Visibility
▼ 2.8% worse
21.8 faults / 100 tests
Year avg: 21.2 / 100 tests
- Wiper blade: defective
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- Obligatory mirror or device: slightly damaged or loose
- Wiper blade: missing or obviously not clearing the windscreen
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
Lights & Electrics
▼ 7.0% worse
73.7 faults / 100 tests
Year avg: 68.9 / 100 tests
- A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
- Stop lamp(s): all missing or inoperative
- Stop lamp(s): all missing or inoperative
- Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
- Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
Wheels & Suspension
▼ 30.0% worse
346.3 faults / 100 tests
Year avg: 266.4 / 100 tests
- A suspension component: excessively damaged or corroded
- A suspension pin, bush, joint or bearing: excessively worn
- A suspension joint dust cover: severely deteriorated
- Tyre tread depth not in accordance with the requirements
- A spring: or spring component fractured or seriously weakened
Body/Structure
▲ 43.5% better
17.7 faults / 100 tests
Year avg: 31.3 / 100 tests
- Exhaust system has a major leak or is insecure
- Fuel system: leaking, or missing or ineffective filler cap
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
- A transmission shaft constant velocity joint boot: severely deteriorated
Equipment
▲ 20.3% better
5.9 faults / 100 tests
Year avg: 7.4 / 100 tests
- ESC MIL indicates a system malfunction
- A seat belt: webbing or flexible stalk significantly stretched or weakened
- A seat belt: webbing or flexible stalk significantly stretched or weakened
- A seat belt:
Other
▲ 19.4% better
22.4 faults / 100 tests
Year avg: 27.8 / 100 tests
- Engine MIL inoperative or indicating a malfunction
- Exhaust emits dense blue or clearly visible black smoke for a continuous period of 5 seconds at idle
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- Engine MIL inoperative or indicating a malfunction
- Engine MIL inoperative or indicating a malfunction
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 158
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 113
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 108
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 90
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 87
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 72
A suspension joint dust cover: severely deteriorated
MINOR
Occurrences: 62
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 48
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 32
A steering ball joint: with excessive wear or free play
FAIL
Occurrences: 30
Serious faults (Top 10)
A steering ball joint: with excessive wear or free play
FAIL
Occurrences: 30
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 20
Brake pipe damaged or excessively corroded
FAIL
Occurrences: 19
Stop lamp(s): all missing or inoperative
FAIL
Occurrences: 18
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 12
A suspension joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 11
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 10
A suspension component: excessively damaged or corroded
FAIL
Occurrences: 10
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 8
The aim of a headlamp is not within limits laid down in the requirements
FAIL
Occurrences: 8