Peugeot 308 - 2022
74.2 faults per 100 tests
Year average for all cars of 2022 is 71.1 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Peugeot 308, model year 2022.
Sample size: 2,589 cars, 3,152 tests and 2,339 recorded faults.
0%
More faults compared to the average car of same model year
More faults compared to the average car of same model year
Quick summary
Total: 2,589 cars
The 2022 Peugeot 308 has an overall defect rate of 74 per 100 vehicles, which is slightly higher than the yearly average of 70 per 100, indicating a 6% increase in issues. Notably, the model shows a concerning trend in defects as mileage increases, with significant rates in the lower mileage categories compared to the average. While it excels in areas such as steering and visibility, demonstrating fewer defects than the average car, it struggles with brakes and body structure, where it shows higher defect rates. Overall, the Peugeot 308 stands out for its reliability in certain categories but raises concerns in critical areas that could impact safety and performance.
Cars by mileage segment
Total: 2,589 cars
More model years for Peugeot 308
Other models from Peugeot
Peugeot 1007
Peugeot 106
Peugeot 107
Peugeot 108
Peugeot 2008
Peugeot 205
Peugeot 206
Peugeot 207
Peugeot 208
Peugeot 3008
Peugeot 306
Peugeot 307
Peugeot 308
Peugeot 4007
Peugeot 406
Peugeot 407
Peugeot 5008
Peugeot 508
Peugeot BIPPER
Peugeot BOXER
Peugeot EXPERT
Peugeot HORIZON
Peugeot PARTNER
Peugeot RCZ
Peugeot RIFTER
Categories
Brakes
▼ 19.2% worse
37.2 faults / 100 tests
Year avg: 31.2 / 100 tests
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake disc or drum: significantly and obviously worn
- Excessive fluctuation in brake effort through each wheel revolution
- Brake lining or pad: worn below 1.5mm
- Brake lining or pad: worn below 1.5mm
Steering
▲ 25.0% better
0.3 faults / 100 tests
Year avg: 0.4 / 100 tests
- A steering ball joint: with excessive wear or free play
- Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
- Free play in the steering, measured at the rim of the steering wheel is: excessive
Visibility
▲ 40.8% better
7.4 faults / 100 tests
Year avg: 12.5 / 100 tests
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
- Wiper blade: missing or obviously not clearing the windscreen
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- Wiper blade: defective
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
Lights & Electrics
▲ 28.4% better
7.8 faults / 100 tests
Year avg: 10.9 / 100 tests
- The aim of a headlamp is not within limits laid down in the requirements
- A lens defective: which has no effect on emitted light
- The aim of a headlamp is not within limits laid down in the requirements
- Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
- A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
Wheels & Suspension
▼ 10.2% worse
90.4 faults / 100 tests
Year avg: 82.0 / 100 tests
- Tyre tread depth not in accordance with the requirements
- A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
- A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
Body/Structure
▼ 62.5% worse
2.6 faults / 100 tests
Year avg: 1.6 / 100 tests
- A transmission shaft constant velocity joint boot: severely deteriorated
- A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
- A door will not open using the relevant control or close properly
- Exhaust system has a major leak or is insecure
- A main load-bearing structural member: fractured or deformed such that structural rigidity is significantly reduced
Equipment
▼ 23.1% worse
1.6 faults / 100 tests
Year avg: 1.3 / 100 tests
- Seat belt buckle missing, damaged or not functioning as intended
- A seat belt:
- A seat belt:
- Seat belt not functioning as intended or of an incorrect type
- An SRS malfunction indicator lamp (MIL) indicates a system malfunction
Other
▲ 52.4% better
1.0 faults / 100 tests
Year avg: 2.1 / 100 tests
- Engine MIL inoperative or indicating a malfunction
- Engine MIL inoperative or indicating a malfunction
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- Any part of the noise suppression system: insecure
- Lambda coefficient outside the default limits or the range specified by the manufacturer
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 628
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 293
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 264
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
ADVISORY
Occurrences: 201
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 181
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 98
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
FAIL
Occurrences: 87
The aim of a headlamp is not within limits laid down in the requirements
PRS
Occurrences: 75
Brake disc or drum: significantly and obviously worn
ADVISORY
Occurrences: 59
A wheel: badly distorted or wear between wheel and hub at spigot mounting
ADVISORY
Occurrences: 43
Serious faults (Top 10)
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 98
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
FAIL
Occurrences: 87
Brake lining or pad: worn below 1.5mm
FAIL
Occurrences: 31
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 27
The aim of a headlamp is not within limits laid down in the requirements
FAIL
Occurrences: 22
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 10
A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
FAIL
Occurrences: 6
Seat belt buckle missing, damaged or not functioning as intended
FAIL
Occurrences: 6
Excessive fluctuation in brake effort through each wheel revolution
FAIL
Occurrences: 5
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 5