Skip to main content

Peugeot 206 - 2000

380.6 faults per 100 tests
Year average for all cars of 2000 is 366.2 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Peugeot 206, model year 2000. Sample size: 1,089 cars, 2,280 tests and 8,677 recorded faults.
0%
More faults compared to the average car of same model year

Quick summary

Total: 1,089 cars

The Peugeot 206 from the year 2000 has an overall defect rate of 381 defects per 100 vehicles, which is 5.1% higher than the average for cars of the same year. Notably, this model shows a significant increase in defects as mileage increases, particularly in the highest mileage segment where the defect rate reaches 529 per 100 vehicles. In comparison to the average, the Peugeot 206 performs better in steering and equipment defects, with rates significantly lower than the average. However, it struggles with other categories, having a much higher rate of defects in this area. Overall, while the Peugeot 206 has certain strengths, its increasing defect rate with mileage is a concern.

Cars by mileage segment

Total: 1,089 cars

Categories

Brakes
▼ 3.1% worse
168.0 faults / 100 tests
Year avg: 162.9 / 100 tests
  • Brake pipe damaged or excessively corroded
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Brakes imbalance across an axle such that: the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle. Or in the case of testing on the road, the vehicle deviates excessively from a straight lin
  • Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
  • Brake lining or pad: worn below 1.5mm
Steering
▲ 56.7% better
11.6 faults / 100 tests
Year avg: 26.8 / 100 tests
  • A steering ball joint: with excessive wear or free play
  • A steering ball joint: with excessive wear or free play
  • Power steering fluid leaking or system malfunctioning
  • Power steering fluid leaking or system malfunctioning
  • Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
Visibility
▲ 1.1% better
28.2 faults / 100 tests
Year avg: 28.5 / 100 tests
  • Wiper blade: missing or obviously not clearing the windscreen
  • Wiper blade: defective
  • Obligatory mirror or device: slightly damaged or loose
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
Lights & Electrics
▼ 5.9% worse
84.6 faults / 100 tests
Year avg: 79.9 / 100 tests
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
  • Stop lamp(s): all missing or inoperative
  • Lamp emitted colour, position or intensity not in accordance with the requirements
  • Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
  • Lamp emitted colour, position or intensity not in accordance with the requirements
Wheels & Suspension
▼ 1.0% worse
284.9 faults / 100 tests
Year avg: 282.2 / 100 tests
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A spring: or spring component fractured or seriously weakened
  • A suspension pin, bush, joint or bearing: excessively worn
  • Tyre tread depth not in accordance with the requirements
  • A suspension pin, bush, joint or bearing: excessively worn
Body/Structure
▼ 0.3% worse
76.3 faults / 100 tests
Year avg: 76.1 / 100 tests
  • Exhaust system has a major leak or is insecure
  • A transmission shaft constant velocity joint boot: severely deteriorated
  • Exhaust system has a major leak or is insecure
  • A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
Equipment
▲ 31.1% better
12.2 faults / 100 tests
Year avg: 17.7 / 100 tests
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • Audible warning:
  • A seat belt: webbing or flexible stalk significantly stretched or weakened
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
Other
▼ 64.3% worse
95.3 faults / 100 tests
Year avg: 58.0 / 100 tests
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Emissions levels exceed the manufacturer’s specified limits
  • Emissions test unable to be completed
  • Lambda coefficient outside the default limits or the range specified by the manufacturer
  • Emissions levels exceed default limits

Fault rate by mileage segment

Model    Year average
0 543 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 651
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 564
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 562
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 471
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 448
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 370
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 317
Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
ADVISORY
Occurrences: 292
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 291
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 214

Serious faults (Top 10)

A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 214
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 138
Exhaust system has a major leak or is insecure
FAIL
Occurrences: 125
Emissions levels exceed the manufacturer’s specified limits
FAIL
Occurrences: 121
Emissions levels exceed default limits
FAIL
Occurrences: 109
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 104
A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
FAIL
Occurrences: 102
Wiper blade: missing or obviously not clearing the windscreen
FAIL
Occurrences: 95
Brakes imbalance across an axle such that: the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle. Or in the case of testing on the road, the vehicle deviates excessively from a straight lin
FAIL
Occurrences: 89
Stop lamp(s): all missing or inoperative
FAIL
Occurrences: 72