Skip to main content

Peugeot 206 - 1999

396.9 faults per 100 tests
Year average for all cars of 1999 is 349.1 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Peugeot 206, model year 1999. Sample size: 497 cars, 1,065 tests and 4,227 recorded faults.
0%
More faults compared to the average car of same model year

Quick summary

Total: 497 cars

The 1999 Peugeot 206 has a higher overall defect rate of 397 defects per 100 vehicles compared to the average of 345, making it 15% worse than similar models from the same year. Notably, the defect rate increases significantly with mileage, particularly in the 62,000 to 124,000 miles range where it reaches 570 defects per 100 vehicles. The model excels in steering and equipment categories, showing 56% and 42% fewer defects respectively than the average. However, it struggles with lights and electrics, with a 50% higher defect rate, and also shows a significant increase in other defects, indicating potential areas for concern.

Cars by mileage segment

Total: 497 cars

Categories

Brakes
▼ 19.1% worse
182.7 faults / 100 tests
Year avg: 153.4 / 100 tests
  • Brake pipe damaged or excessively corroded
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Brake hose ferrules: excessively corroded
  • Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
  • Brake lining or pad: worn below 1.5mm
Steering
▲ 56.4% better
11.3 faults / 100 tests
Year avg: 25.9 / 100 tests
  • A steering ball joint: with excessive wear or free play
  • A steering ball joint: with excessive wear or free play
  • Free play in the steering, measured at the rim of the steering wheel is: excessive
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • Power steering fluid leaking or system malfunctioning
Visibility
▼ 7.9% worse
28.7 faults / 100 tests
Year avg: 26.6 / 100 tests
  • Wiper blade: defective
  • Wiper blade: missing or obviously not clearing the windscreen
  • Wiper blade: missing or obviously not clearing the windscreen
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
Lights & Electrics
▼ 51.2% worse
110.4 faults / 100 tests
Year avg: 73.0 / 100 tests
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
  • Stop lamp(s): all missing or inoperative
  • Lamp emitted colour, position or intensity not in accordance with the requirements
  • Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
  • Lamp emitted colour, position or intensity not in accordance with the requirements
Wheels & Suspension
▼ 1.9% worse
271.9 faults / 100 tests
Year avg: 266.9 / 100 tests
  • A suspension pin, bush, joint or bearing: excessively worn
  • Tyre tread depth not in accordance with the requirements
  • A suspension pin, bush, joint or bearing: excessively worn
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A spring: or spring component fractured or seriously weakened
Body/Structure
▲ 8.6% better
69.9 faults / 100 tests
Year avg: 76.5 / 100 tests
  • Exhaust system has a major leak or is insecure
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • Exhaust system has a major leak or is insecure
  • A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
  • A transmission shaft constant velocity joint boot: severely deteriorated
Equipment
▲ 45.3% better
10.5 faults / 100 tests
Year avg: 19.2 / 100 tests
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • Audible warning:
  • A seat belt: webbing or flexible stalk significantly stretched or weakened
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
Other
▼ 91.9% worse
108.4 faults / 100 tests
Year avg: 56.5 / 100 tests
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Emissions levels exceed the manufacturer’s specified limits
  • Emissions test unable to be completed
  • Lambda coefficient outside the default limits or the range specified by the manufacturer
  • Emissions levels exceed default limits

Fault rate by mileage segment

Model    Year average
0 570 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 345
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 288
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 250
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 231
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 183
Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
ADVISORY
Occurrences: 161
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 144
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 128
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 108
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 81

Serious faults (Top 10)

Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 81
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 79
Emissions levels exceed the manufacturer’s specified limits
FAIL
Occurrences: 65
Emissions levels exceed default limits
FAIL
Occurrences: 56
Exhaust system has a major leak or is insecure
FAIL
Occurrences: 55
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 52
Stop lamp(s): all missing or inoperative
FAIL
Occurrences: 51
A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
FAIL
Occurrences: 50
A suspension joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 46
Wiper blade: missing or obviously not clearing the windscreen
FAIL
Occurrences: 45