Skip to main content

Peugeot 107 - 2013

229.3 faults per 100 tests
Year average for all cars of 2013 is 221.9 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Peugeot 107, model year 2013. Sample size: 16,423 cars, 36,205 tests and 83,013 recorded faults.
0%
More faults compared to the average car of same model year

Quick summary

Total: 16,423 cars

The 2013 Peugeot 107 has an overall defect rate of 229 per 100 vehicles, which is 4.5% higher than the average for cars of the same year. Notably, as mileage increases, the defect rate rises significantly, with vehicles over 124,000 miles showing a rate of 453 defects per 100. The Peugeot 107 performs exceptionally well in categories like steering and visibility, with defect rates considerably lower than the average, whereas it struggles with lights and electrics, where its defect rate is notably higher than the average. Overall, this model demonstrates strengths in certain areas but also has clear weaknesses that potential buyers should consider.

Cars by mileage segment

Total: 16,423 cars

Categories

Brakes
▼ 17.3% worse
115.4 faults / 100 tests
Year avg: 98.4 / 100 tests
  • Brake pipe damaged or excessively corroded
  • Brake lining or pad: worn below 1.5mm
  • Brake disc or drum: significantly and obviously worn
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Significant brake effort recorded with no brake applied indicating a binding brake
Steering
▲ 89.9% better
1.3 faults / 100 tests
Year avg: 12.9 / 100 tests
  • A steering ball joint: with excessive wear or free play
  • Steering linkage retaining or locking device missing or ineffective
  • Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • A steering ball joint: with excessive wear or free play
Visibility
▲ 31.1% better
12.4 faults / 100 tests
Year avg: 18.0 / 100 tests
  • Wiper blade: defective
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Wiper blade: missing or obviously not clearing the windscreen
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
Lights & Electrics
▼ 18.6% worse
59.4 faults / 100 tests
Year avg: 50.1 / 100 tests
  • Headlamp reflector or lens: slightly defective
  • Beam image obviously incorrect
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
  • Indicator or hazard warning switch: inoperative
  • The aim of a headlamp is not within limits laid down in the requirements
Wheels & Suspension
▼ 7.9% worse
236.9 faults / 100 tests
Year avg: 219.6 / 100 tests
  • A suspension pin, bush, joint or bearing: excessively worn
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A spring: or spring component fractured or seriously weakened
  • Tyre tread depth not in accordance with the requirements
  • A suspension component: excessively damaged or corroded
Body/Structure
▼ 3.0% worse
20.6 faults / 100 tests
Year avg: 20.0 / 100 tests
  • Exhaust system has a major leak or is insecure
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
  • Exhaust system has a major leak or is insecure
  • A transmission shaft constant velocity joint boot: severely deteriorated
Equipment
▲ 53.8% better
2.4 faults / 100 tests
Year avg: 5.2 / 100 tests
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • A seat belt: webbing or flexible stalk significantly stretched or weakened
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • Audible warning:
  • A seat belt:
Other
▲ 47.4% better
10.3 faults / 100 tests
Year avg: 19.6 / 100 tests
  • Lambda coefficient outside the default limits or the range specified by the manufacturer
  • Engine MIL inoperative or indicating a malfunction
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Emissions test unable to be completed
  • An induction or exhaust leak that could affect emissions levels

Fault rate by mileage segment

Model    Year average
0 453 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 9,343
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 8,817
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 7,353
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 7,035
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 4,910
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 4,724
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 2,305
A wheel: badly distorted or wear between wheel and hub at spigot mounting
ADVISORY
Occurrences: 2,231
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 1,897
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 1,853

Serious faults (Top 10)

Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 927
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 798
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 725
Indicator or hazard warning switch: inoperative
FAIL
Occurrences: 672
Brake pipe damaged or excessively corroded
FAIL
Occurrences: 641
Beam image obviously incorrect
FAIL
Occurrences: 601
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 540
Significant brake effort recorded with no brake applied indicating a binding brake
FAIL
Occurrences: 536
Exhaust system has a major leak or is insecure
FAIL
Occurrences: 528
Brake lining or pad: worn below 1.5mm
FAIL
Occurrences: 500