Skip to main content

Nissan SERENA - 2011

142.9 faults per 100 tests
Year average for all cars of 2011 is 274.4 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Nissan SERENA, model year 2011. Sample size: 205 cars, 224 tests and 320 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 205 cars

The 2011 Nissan Serena has a notably lower overall defect rate compared to the average car of the same year, with 143 defects per 100 vehicles, which is 47% better than the average of 271. While tyre wear was not highlighted, the model excels in several categories, particularly in brakes and visibility, where it performs significantly better than average. However, steering issues are a downside, as this model shows a higher defect rate in this area compared to the average. Additionally, it exhibits a distinct trend in defect rates across various mileage ranges, especially with higher mileage vehicles showing an increased incidence of defects.

Cars by mileage segment

Total: 205 cars

Categories

Brakes
▲ 28.5% better
78.6 faults / 100 tests
Year avg: 109.9 / 100 tests
  • Brake lining or pad: worn below 1.5mm
  • Brake pipe damaged or excessively corroded
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Excessive fluctuation in brake effort through each wheel revolution
  • Brake lining or pad: worn below 1.5mm
Steering
▼ 19.0% worse
18.8 faults / 100 tests
Year avg: 15.8 / 100 tests
  • A steering ball joint: with excessive wear or free play
  • A steering ball joint: with excessive wear or free play
  • Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
Visibility
▲ 32.5% better
14.3 faults / 100 tests
Year avg: 21.2 / 100 tests
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • An obstruction: materially affecting the driver’s view of the road through the swept area of the windscreen or an obligatory external mirror not visible
  • Wiper blade: defective
  • Wiper blade: missing or obviously not clearing the windscreen
  • Wiper blade: missing or obviously not clearing the windscreen
Lights & Electrics
▲ 23.5% better
52.7 faults / 100 tests
Year avg: 68.9 / 100 tests
  • Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
  • Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
  • An obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
  • The aim of a headlamp is not within limits laid down in the requirements
Wheels & Suspension
▲ 61.1% better
103.6 faults / 100 tests
Year avg: 266.4 / 100 tests
  • A suspension pin, bush, joint or bearing: excessively worn
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A shock absorber damaged … or showing signs of severe leakage
  • Tyre tread depth not in accordance with the requirements
  • A stub axle swivel pin and/or bush: excessively worn
Body/Structure
▲ 82.7% better
5.4 faults / 100 tests
Year avg: 31.3 / 100 tests
  • An engine mounting or bracket: severely damaged or deteriorated resulting in excessive movement
  • Exhaust system has a major leak or is insecure
  • Exhaust system has a major leak or is insecure
  • Body, cab or chassis: excessively corroded at mounting points
  • Body, cab or chassis: excessively corroded at mounting points
Equipment
▲ 63.5% better
2.7 faults / 100 tests
Year avg: 7.4 / 100 tests
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
Other
▲ 64.7% better
9.8 faults / 100 tests
Year avg: 27.8 / 100 tests
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Emissions test unable to be completed
  • Lambda coefficient outside the default limits or the range specified by the manufacturer
  • Emissions levels exceed default limits
  • Emissions levels exceed the manufacturer’s specified limits

Fault rate by mileage segment

Model    Year average
0 472 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 33
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 32
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 29
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 23
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 17
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 12
Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 9
An obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning
FAIL
Occurrences: 9
Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
ADVISORY
Occurrences: 8
Wiper blade: defective
MINOR
Occurrences: 8

Serious faults (Top 10)

Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 9
An obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning
FAIL
Occurrences: 9
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 6
Brake lining or pad: worn below 1.5mm
FAIL
Occurrences: 5
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 4
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 4
Beam image obviously incorrect
FAIL
Occurrences: 4
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
FAIL
Occurrences: 3
is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
FAIL
Occurrences: 3
A steering ball joint: with excessive wear or free play
FAIL
Occurrences: 3