Nissan CABSTAR - 2016
More faults compared to the average car of same model year
Quick summary
The 2016 Nissan Cabstar has a significantly higher overall defect rate of 412 defects per 100 vehicles, compared to the average of 151 defects for cars of the same year, making it 173% worse than the average. Notably, as mileage increases, defect rates also rise, with the highest rate observed in the 93,000 to 124,000 miles category at 613 defects per 100 vehicles. The Cabstar stands out negatively in several categories, particularly in brakes and steering, where it shows a substantial increase in defects compared to the average. Other areas of concern include visibility and lights & electrics, both showing high defect percentages relative to the average. Overall, the model exhibits significant performance issues that potential owners should consider.
Cars by mileage segment
More model years for Nissan CABSTAR
Other models from Nissan
Categories
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake lining or pad: worn below 1.5mm
- Parking brake efficiency: less than 50% of the required value
- Parking brake efficiency: below minimum requirement
- Brake disc or drum: significantly and obviously worn
- A steering ball joint: with excessive wear or free play
- A steering ball joint: with excessive wear or free play
- Free play in the steering, measured at the rim of the steering wheel is: excessive
- Steering rack gaiter or ball joint dust cover: damaged or deteriorated
- Power steering fluid leaking or system malfunctioning
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- Wiper blade: defective
- Obligatory mirror or device: slightly damaged or loose
- Wiper blade: missing or obviously not clearing the windscreen
- A lens defective: which has no effect on emitted light
- The aim of a headlamp is not within limits laid down in the requirements
- Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
- A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
- A headlamp: missing, inoperative or more than ½ not functioning in the case of LED
- A suspension pin, bush, joint or bearing: excessively worn
- A suspension pin, bush, joint or bearing: excessively worn
- A shock absorber bush excessively worn
- Tyre tread depth not in accordance with the requirements
- A shock absorber bush excessively worn
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- Body, cab or chassis: excessively corroded at mounting points
- Bumper: insecure or with damage likely to cause injury when grazed or contacted
- Body or cab mounting: fixings missing or insecure such that overall security is significantly reduced
- Bumper: insecure or with damage likely to cause injury when grazed or contacted
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- ESC MIL indicates a system malfunction
- An SRS malfunction indicator lamp (MIL) indicates a system malfunction
- Audible warning:
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- Engine MIL inoperative or indicating a malfunction
- Smoke opacity levels exceed the manufacturer’s specified limit
- Engine MIL inoperative or indicating a malfunction
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users