Skip to main content

Nissan 350 Z - 2007

221.7 faults per 100 tests
Year average for all cars of 2007 is 357.4 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Nissan 350 Z, model year 2007. Sample size: 731 cars, 1,545 tests and 3,425 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 731 cars

The 2007 Nissan 350 Z has an overall defect rate of 222 per 100 vehicles, which is 37% lower than the average rate for cars of the same year. The model performs particularly well in categories such as steering, visibility, and lights and electrics, showing significantly fewer defects compared to the average. While defects tend to increase with mileage, this model maintains a relatively consistent performance across various mileage segments. Notably, it has a lower incidence of defects in areas like wheels and suspension compared to the average vehicle.

Cars by mileage segment

Total: 731 cars

Categories

Brakes
▲ 11.2% better
125.8 faults / 100 tests
Year avg: 141.7 / 100 tests
  • Brake pipe damaged or excessively corroded
  • Brake lining or pad: worn below 1.5mm
  • Brake hose ferrules: excessively corroded
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Brake pipe damaged or excessively corroded
Steering
▲ 62.0% better
7.6 faults / 100 tests
Year avg: 20.0 / 100 tests
  • Power steering fluid leaking or system malfunctioning
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • Steering linkage retaining or locking device missing or ineffective
  • A steering ball joint: with excessive wear or free play
  • A steering ball joint: with excessive wear or free play
Visibility
▲ 28.7% better
18.9 faults / 100 tests
Year avg: 26.5 / 100 tests
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Wiper blade: defective
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Wiper blade: missing or obviously not clearing the windscreen
Lights & Electrics
▲ 51.2% better
50.2 faults / 100 tests
Year avg: 102.9 / 100 tests
  • Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
  • Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
  • Headlamp reflector or lens: slightly defective
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
  • Beam image obviously incorrect
Wheels & Suspension
▲ 43.3% better
178.1 faults / 100 tests
Year avg: 314.0 / 100 tests
  • A suspension component: excessively damaged or corroded
  • Tyre tread depth not in accordance with the requirements
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A suspension pin, bush, joint or bearing: excessively worn
  • A spring: or spring component fractured or seriously weakened
Body/Structure
▲ 56.9% better
23.6 faults / 100 tests
Year avg: 54.8 / 100 tests
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • Body, cab or chassis: excessively corroded at mounting points
  • Exhaust system has a major leak or is insecure
  • Exhaust system has a major leak or is insecure
  • A body panel or body component: damaged or corroded and likely to cause injury when grazed or contacted, or insecure
Equipment
▲ 44.0% better
6.1 faults / 100 tests
Year avg: 10.9 / 100 tests
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • A seat belt: or flexible stalk damaged
Other
▲ 24.8% better
33.0 faults / 100 tests
Year avg: 43.9 / 100 tests
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Emissions levels exceed default limits
  • Exhaust noise levels in excess of those permitted
  • Lambda coefficient outside the default limits or the range specified by the manufacturer
  • Engine MIL inoperative or indicating a malfunction

Fault rate by mileage segment

Model    Year average
0 498 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 406
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 371
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 237
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 180
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 151
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 139
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 105
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 105
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 99
Headlamp reflector or lens: slightly defective
MINOR
Occurrences: 76

Serious faults (Top 10)

A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 72
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 40
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 39
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 37
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 33
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 32
Brake pipe damaged or excessively corroded
FAIL
Occurrences: 28
Beam image obviously incorrect
FAIL
Occurrences: 28
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 27
Emissions levels exceed default limits
FAIL
Occurrences: 26