Skip to main content

Nissan 350 Z - 2003

292.0 faults per 100 tests
Year average for all cars of 2003 is 380.4 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Nissan 350 Z, model year 2003. Sample size: 381 cars, 759 tests and 2,216 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 381 cars

The 2003 Nissan 350 Z has a lower overall defect rate compared to the average car of the same year, with 292 defects per 100 vehicles, which is 23% better than the average of 378. In terms of mileage, the defect rate increases with distance driven, peaking at 493 defects per 100 vehicles for those with 93,000 to 124,000 miles. Notably, the 350 Z excels in categories such as brakes and steering, showing a significant reduction in defect rates compared to the average, while also performing well in visibility and lights & electrics. Overall, this model stands out positively, reflecting a reliable performance relative to its peers.

Cars by mileage segment

Total: 381 cars

Categories

Brakes
▲ 20.3% better
134.9 faults / 100 tests
Year avg: 169.3 / 100 tests
  • Brake pipe damaged or excessively corroded
  • Brake lining or pad: worn below 1.5mm
  • Brake hose ferrules: excessively corroded
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Brake pipe damaged or excessively corroded
Steering
▲ 46.8% better
13.4 faults / 100 tests
Year avg: 25.2 / 100 tests
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • A steering ball joint: with excessive wear or free play
  • Power steering fluid leaking or system malfunctioning
  • Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
  • A steering ball joint: with excessive wear or free play
Visibility
▲ 25.8% better
22.1 faults / 100 tests
Year avg: 29.8 / 100 tests
  • Wiper blade: missing or obviously not clearing the windscreen
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Wiper blade: missing or obviously not clearing the windscreen
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
Lights & Electrics
▲ 37.5% better
64.3 faults / 100 tests
Year avg: 102.8 / 100 tests
  • Headlamp reflector or lens: slightly defective
  • The aim of a headlamp is not within limits laid down in the requirements
  • Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
  • Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
Wheels & Suspension
▲ 16.8% better
251.4 faults / 100 tests
Year avg: 302.1 / 100 tests
  • A suspension component: excessively damaged or corroded
  • A suspension joint dust cover: severely deteriorated
  • Tyre tread depth not in accordance with the requirements
  • A suspension pin, bush, joint or bearing: excessively worn
  • A spring: or spring component fractured or seriously weakened
Body/Structure
▲ 38.5% better
40.1 faults / 100 tests
Year avg: 65.2 / 100 tests
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • Exhaust system has a major leak or is insecure
  • A body panel or body component: damaged or corroded and likely to cause injury when grazed or contacted, or insecure
  • Exhaust system has a major leak or is insecure
  • Body, cab or chassis: excessively corroded at mounting points
Equipment
▲ 8.8% better
12.4 faults / 100 tests
Year avg: 13.6 / 100 tests
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • Audible warning:
Other
▲ 14.0% better
45.3 faults / 100 tests
Year avg: 52.7 / 100 tests
  • Emissions levels exceed default limits
  • Exhaust noise levels in excess of those permitted
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Lambda coefficient outside the default limits or the range specified by the manufacturer
  • Emissions levels exceed the manufacturer’s specified limits

Fault rate by mileage segment

Model    Year average
0 538 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 195
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 188
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 110
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 109
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 99
A suspension joint dust cover: severely deteriorated
MINOR
Occurrences: 97
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 87
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
ADVISORY
Occurrences: 84
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 71
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 56

Serious faults (Top 10)

The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 35
Brake pipe damaged or excessively corroded
FAIL
Occurrences: 35
Emissions levels exceed default limits
FAIL
Occurrences: 30
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 27
Wiper blade: missing or obviously not clearing the windscreen
FAIL
Occurrences: 22
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 21
The aim of a headlamp is not within limits laid down in the requirements
FAIL
Occurrences: 19
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 19
Emissions levels exceed the manufacturer’s specified limits
FAIL
Occurrences: 17
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 17