Skip to main content

Mg TF - 2008

193.0 faults per 100 tests
Year average for all cars of 2008 is 340.8 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Mg TF, model year 2008. Sample size: 127 cars, 287 tests and 554 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 127 cars

The 2008 MG TF has an overall defect rate of 193 per 100 vehicles, which is significantly lower than the average of 337 per 100, representing a 43% improvement. Notably, this model excels in categories such as steering, visibility, and lights & electrics, with defect rates substantially below the average. However, it shows a higher defect rate in the lowest mileage segment (452 per 100) compared to the yearly average (308 per 100), indicating potential issues for newer vehicles. Overall, the MG TF demonstrates strong reliability in several key areas while maintaining a lower overall defect incidence.

Cars by mileage segment

Total: 127 cars

Categories

Brakes
▼ 8.4% worse
144.3 faults / 100 tests
Year avg: 133.1 / 100 tests
  • Brake pipe damaged or excessively corroded
  • Brake lining or pad: worn below 1.5mm
  • Significant brake effort recorded with no brake applied indicating a binding brake
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Parking brake efficiency: below minimum requirement
Steering
▲ 26.7% better
13.2 faults / 100 tests
Year avg: 18.0 / 100 tests
  • A steering ball joint: with excessive wear or free play
  • A steering ball joint: with excessive wear or free play
  • Excessive wear or play in a universal joint or a flexible coupling excessively deteriorated
Visibility
▲ 58.5% better
10.5 faults / 100 tests
Year avg: 25.3 / 100 tests
  • Wiper blade: missing or obviously not clearing the windscreen
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Wiper blade: defective
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
Lights & Electrics
▲ 75.8% better
22.3 faults / 100 tests
Year avg: 92.2 / 100 tests
  • Beam image obviously incorrect
  • Stop lamp(s): all missing or inoperative
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
  • The aim of a headlamp is not within limits laid down in the requirements
  • Lamp emitted colour, position or intensity not in accordance with the requirements
Wheels & Suspension
▲ 49.9% better
155.4 faults / 100 tests
Year avg: 310.3 / 100 tests
  • A suspension component: excessively damaged or corroded
  • A suspension pin, bush, joint or bearing: excessively worn
  • A suspension pin, bush, joint or bearing: excessively worn
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • Tyre tread depth not in accordance with the requirements
Body/Structure
▲ 66.1% better
17.4 faults / 100 tests
Year avg: 51.3 / 100 tests
  • Exhaust system has a major leak or is insecure
  • A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
  • A transmission shaft constant velocity joint boot: severely deteriorated
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • Exhaust system has a major leak or is insecure
Equipment
▲ 58.4% better
4.2 faults / 100 tests
Year avg: 10.1 / 100 tests
  • A seat belt:
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • Audible warning:
  • An airbag obviously inoperative
Other
▲ 54.4% better
18.8 faults / 100 tests
Year avg: 41.2 / 100 tests
  • Engine MIL inoperative or indicating a malfunction
  • Emissions test unable to be completed
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Lambda coefficient outside the default limits or the range specified by the manufacturer
  • An induction or exhaust leak that could affect emissions levels

Fault rate by mileage segment

Model    Year average
0 481 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 99
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 57
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 46
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 43
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 41
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 18
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 14
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 11
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 10
Parking brake efficiency: below minimum requirement
FAIL
Occurrences: 9

Serious faults (Top 10)

A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 10
Parking brake efficiency: below minimum requirement
FAIL
Occurrences: 9
A steering ball joint: with excessive wear or free play
FAIL
Occurrences: 7
Engine MIL inoperative or indicating a malfunction
FAIL
Occurrences: 7
A suspension component: excessively damaged or corroded
FAIL
Occurrences: 6
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 4
Parking brake inoperative on one side, or in the case of testing on the road, the vehicle deviates excessively from a straight line
FAIL
Occurrences: 4
Brakes imbalance across an axle such that: the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle. Or in the case of testing on the road, the vehicle deviates excessively from a straight lin
FAIL
Occurrences: 4
Lamp emitted colour, position or intensity not in accordance with the requirements
FAIL
Occurrences: 3
Beam image obviously incorrect
FAIL
Occurrences: 3