Skip to main content

Mazda RX-8 - 2008

282.2 faults per 100 tests
Year average for all cars of 2008 is 340.8 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Mazda RX-8, model year 2008. Sample size: 461 cars, 961 tests and 2,712 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 461 cars

The 2008 Mazda RX-8 has an overall defect rate of 282 per 100 cars, which is 16% lower than the average for its year at 337 per 100. Notably, the RX-8 performs exceptionally well in the steering and visibility categories, with defect rates significantly below the average. However, it exhibits a higher incidence of defects in the "Other" category, with a rate of 62 compared to the average of 42. Mileage trends show that as the mileage increases, defect rates tend to rise, particularly in the higher mileage brackets where it surpasses the average. Overall, while the RX-8 has specific strong points, it also has areas that may require extra attention.

Cars by mileage segment

Total: 461 cars

Categories

Brakes
▼ 14.6% worse
152.5 faults / 100 tests
Year avg: 133.1 / 100 tests
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Brake pipe damaged or excessively corroded
  • Brake hose ferrules: excessively corroded
  • Brake lining or pad: worn below 1.5mm
  • Significant brake effort recorded with no brake applied indicating a binding brake
Steering
▲ 71.1% better
5.2 faults / 100 tests
Year avg: 18.0 / 100 tests
  • Power steering fluid leaking or system malfunctioning
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • Power steering: inoperative and steering adversely affected
  • Excessive wear or play in a universal joint or a flexible coupling excessively deteriorated
  • Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
Visibility
▲ 45.8% better
13.7 faults / 100 tests
Year avg: 25.3 / 100 tests
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Wiper blade: defective
  • Wiper blade: missing or obviously not clearing the windscreen
  • Wiper blade: missing or obviously not clearing the windscreen
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
Lights & Electrics
▲ 35.2% better
59.7 faults / 100 tests
Year avg: 92.2 / 100 tests
  • Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
  • Headlamp reflector or lens: slightly defective
  • Headlamp levelling device inoperative
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
  • Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
Wheels & Suspension
▲ 25.9% better
230.0 faults / 100 tests
Year avg: 310.3 / 100 tests
  • Tyre tread depth not in accordance with the requirements
  • A suspension pin, bush, joint or bearing: excessively worn
  • A suspension component: excessively damaged or corroded
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A spring: or spring component fractured or seriously weakened
Body/Structure
▲ 34.3% better
33.7 faults / 100 tests
Year avg: 51.3 / 100 tests
  • Exhaust system has a major leak or is insecure
  • Exhaust system has a major leak or is insecure
  • Body, cab or chassis: excessively corroded at mounting points
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
Equipment
▲ 29.7% better
7.1 faults / 100 tests
Year avg: 10.1 / 100 tests
  • A seat belt:
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • A seat belt: webbing or flexible stalk significantly stretched or weakened
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • ESC MIL indicates a system malfunction
Other
▼ 51.5% worse
62.4 faults / 100 tests
Year avg: 41.2 / 100 tests
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Lambda coefficient outside the default limits or the range specified by the manufacturer
  • Engine MIL inoperative or indicating a malfunction
  • Emissions levels exceed the manufacturer’s specified limits
  • Emissions levels exceed default limits

Fault rate by mileage segment

Model    Year average
0 500 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 268
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 253
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 197
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 133
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 109
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 108
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 106
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 93
Significant brake effort recorded with no brake applied indicating a binding brake
ADVISORY
Occurrences: 83
Brake hose ferrules: excessively corroded
ADVISORY
Occurrences: 75

Serious faults (Top 10)

Emissions levels exceed the manufacturer’s specified limits
FAIL
Occurrences: 53
Significant brake effort recorded with no brake applied indicating a binding brake
FAIL
Occurrences: 34
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 32
Emissions levels exceed default limits
FAIL
Occurrences: 31
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 30
A spring: or spring component fractured or seriously weakened
FAIL
Occurrences: 25
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 24
Engine MIL inoperative or indicating a malfunction
FAIL
Occurrences: 23
Exhaust system has a major leak or is insecure
FAIL
Occurrences: 20
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
FAIL
Occurrences: 18