Mazda MX-5 - 2005
305.2 faults per 100 tests
Year average for all cars of 2005 is 377.4 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Mazda MX-5, model year 2005.
Sample size: 3,527 cars, 7,459 tests and 22,768 recorded faults.
0%
Less faults compared to the average car of same model year
Less faults compared to the average car of same model year
Quick summary
Total: 3,527 cars
The 2005 Mazda MX-5 has an overall defect rate of 305 defects per 100 vehicles, which is significantly lower than the yearly average of 376 defects, marking an 18.7% improvement. While tyre wear is a common issue across many vehicles, the MX-5 particularly excels in categories such as Steering, Visibility, and Lights & Electrics, showing notably fewer defects compared to the average. In contrast, it faces a higher rate of Equipment-related defects. Mileage trends indicate that as the vehicle ages, defect rates increase, particularly in the highest mileage bracket, but the MX-5 maintains a competitive performance overall.
Cars by mileage segment
Total: 3,527 cars
Categories
Brakes
▲ 16.3% better
132.7 faults / 100 tests
Year avg: 158.5 / 100 tests
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake lining or pad: worn below 1.5mm
- Brake hose ferrules: excessively corroded
- Brake pipe damaged or excessively corroded
- Significant brake effort recorded with no brake applied indicating a binding brake
Steering
▲ 64.3% better
8.0 faults / 100 tests
Year avg: 22.4 / 100 tests
- Steering rack gaiter or ball joint dust cover: damaged or deteriorated
- Power steering fluid leaking or system malfunctioning
- Power steering pipe, hose or wiring: excessively damaged or corroded
- A steering ball joint: with excessive wear or free play
- A steering ball joint: with excessive wear or free play
Visibility
▲ 41.2% better
16.7 faults / 100 tests
Year avg: 28.4 / 100 tests
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
- Wiper blade: defective
- Wiper blade: missing or obviously not clearing the windscreen
- Wiper blade: missing or obviously not clearing the windscreen
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
Lights & Electrics
▲ 58.8% better
45.4 faults / 100 tests
Year avg: 110.1 / 100 tests
- A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
- Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
- A headlamp: missing, inoperative or more than ½ not functioning in the case of LED
- Headlamp reflector or lens: slightly defective
- Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
Wheels & Suspension
▲ 9.1% better
285.6 faults / 100 tests
Year avg: 314.1 / 100 tests
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- A suspension pin, bush, joint or bearing: excessively worn
- A suspension component: excessively damaged or corroded
- The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
- Tyre tread depth not in accordance with the requirements
Body/Structure
▼ 4.2% worse
64.1 faults / 100 tests
Year avg: 61.5 / 100 tests
- Exhaust system has a major leak or is insecure
- Body, cab or chassis: excessively corroded at mounting points
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- Body, cab or chassis: excessively corroded at mounting points
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
Equipment
▼ 58.1% worse
20.4 faults / 100 tests
Year avg: 12.9 / 100 tests
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- Audible warning:
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- An SRS malfunction indicator lamp (MIL) indicates a system malfunction
- A seat belt: webbing or flexible stalk significantly stretched or weakened
Other
▲ 19.7% better
37.5 faults / 100 tests
Year avg: 46.7 / 100 tests
- Lambda coefficient outside the default limits or the range specified by the manufacturer
- Emissions levels exceed default limits
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- Emissions levels exceed the manufacturer’s specified limits
- Engine MIL inoperative or indicating a malfunction
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 3,040
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 1,265
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 1,143
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
ADVISORY
Occurrences: 1,024
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
ADVISORY
Occurrences: 981
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 965
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 956
A suspension joint dust cover: severely deteriorated
MINOR
Occurrences: 905
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 756
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 684
Serious faults (Top 10)
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 684
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
FAIL
Occurrences: 354
is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
FAIL
Occurrences: 330
Significant brake effort recorded with no brake applied indicating a binding brake
FAIL
Occurrences: 251
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 180
Body, cab or chassis: excessively corroded at mounting points
FAIL
Occurrences: 175
A suspension joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 168
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 161
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 159
Wiper blade: missing or obviously not clearing the windscreen
FAIL
Occurrences: 135