Mazda MX-5 - 2002
323.9 faults per 100 tests
Year average for all cars of 2002 is 375.3 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Mazda MX-5, model year 2002.
Sample size: 3,425 cars, 6,764 tests and 21,909 recorded faults.
0%
Less faults compared to the average car of same model year
Less faults compared to the average car of same model year
Quick summary
Total: 3,425 cars
The 2002 Mazda MX-5 has an overall defect rate of 324 per 100 vehicles, which is 13% lower than the average for cars of the same year. Notably, in the mileage categories, the MX-5 shows a higher defect rate as mileage increases, particularly over 124,000 miles, where it reaches 566 defects per 100 vehicles. The model excels in areas such as steering and visibility, with defects significantly lower than the average, but it performs worse in equipment-related issues. This combination of strengths and weaknesses highlights the MX-5's reliability, particularly in key areas, while also indicating potential concerns as the vehicle ages.
Cars by mileage segment
Total: 3,425 cars
Categories
Brakes
▲ 16.8% better
138.9 faults / 100 tests
Year avg: 167.0 / 100 tests
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake lining or pad: worn below 1.5mm
- Brake hose ferrules: excessively corroded
- Brake pipe damaged or excessively corroded
- Significant brake effort recorded with no brake applied indicating a binding brake
Steering
▲ 48.2% better
13.1 faults / 100 tests
Year avg: 25.3 / 100 tests
- Steering rack gaiter or ball joint dust cover: damaged or deteriorated
- Power steering fluid leaking or system malfunctioning
- Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
- Power steering pipe, hose or wiring: excessively damaged or corroded
- Power steering fluid leaking or system malfunctioning
Visibility
▲ 42.2% better
17.1 faults / 100 tests
Year avg: 29.6 / 100 tests
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
- Wiper blade: defective
- Wiper blade: missing or obviously not clearing the windscreen
- Wiper blade: missing or obviously not clearing the windscreen
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
Lights & Electrics
▲ 46.1% better
51.7 faults / 100 tests
Year avg: 96.0 / 100 tests
- Headlamp reflector or lens: slightly defective
- Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
- A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
- Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
- Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
Wheels & Suspension
▼ 0.1% worse
295.5 faults / 100 tests
Year avg: 295.2 / 100 tests
- Tyre tread depth not in accordance with the requirements
- A suspension joint dust cover: severely deteriorated
- A suspension component: excessively damaged or corroded
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- A spring: or spring component fractured or seriously weakened
Body/Structure
▲ 4.6% better
65.7 faults / 100 tests
Year avg: 68.9 / 100 tests
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- Body, cab or chassis: excessively corroded at mounting points
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- Exhaust system has a major leak or is insecure
- Body, cab or chassis: excessively corroded at mounting points
Equipment
▼ 36.9% worse
20.4 faults / 100 tests
Year avg: 14.9 / 100 tests
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- Audible warning:
- An SRS malfunction indicator lamp (MIL) indicates a system malfunction
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- A seat belt: webbing or flexible stalk significantly stretched or weakened
Other
▲ 15.3% better
45.4 faults / 100 tests
Year avg: 53.6 / 100 tests
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- Emissions levels exceed default limits
- Emissions test unable to be completed
- Lambda coefficient outside the default limits or the range specified by the manufacturer
- Emissions levels exceed the manufacturer’s specified limits
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 3,364
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
ADVISORY
Occurrences: 1,063
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 1,012
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 1,010
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 964
A suspension joint dust cover: severely deteriorated
MINOR
Occurrences: 831
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 820
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 814
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 768
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
ADVISORY
Occurrences: 728
Serious faults (Top 10)
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 413
is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
FAIL
Occurrences: 304
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
FAIL
Occurrences: 293
A spring: or spring component fractured or seriously weakened
FAIL
Occurrences: 213
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 200
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 179
Significant brake effort recorded with no brake applied indicating a binding brake
FAIL
Occurrences: 168
Body, cab or chassis: excessively corroded at mounting points
FAIL
Occurrences: 167
A suspension joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 149
Parking brake efficiency: below minimum requirement
FAIL
Occurrences: 142