Land rover RANGE ROVER - 1991
223.9 faults per 100 tests
Year average for all cars of 1991 is 263.4 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Land rover RANGE ROVER, model year 1991.
Sample size: 233 cars, 410 tests and 918 recorded faults.
0%
Less faults compared to the average car of same model year
Less faults compared to the average car of same model year
Quick summary
Total: 233 cars
The 1991 Land Rover Range Rover has an overall defect rate of 224 per 100 vehicles, which is 15% lower than the average car of the same year. Notably, it performs better in categories such as brakes and visibility, with defect rates substantially lower than the average. However, it shows a significantly higher rate of defects in the "Other" category, indicating potential unique issues specific to this model. Mileage trends reveal that vehicles with lower mileage (up to 31,000 miles) experience a higher defect rate compared to averages, suggesting that newer models may face different challenges. Overall, while the Range Rover excels in certain areas, it also has notable weaknesses that should be considered by potential buyers.
Cars by mileage segment
Total: 233 cars
Categories
Brakes
▲ 18.8% better
85.4 faults / 100 tests
Year avg: 105.2 / 100 tests
- Brake pipe damaged or excessively corroded
- Brake pipe damaged or excessively corroded
- Brake hose ferrules: excessively corroded
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake lining or pad: worn below 1.5mm
Steering
▼ 7.6% worse
31.2 faults / 100 tests
Year avg: 29.0 / 100 tests
- Power steering fluid leaking or system malfunctioning
- Excessive wear or play in a universal joint or a flexible coupling excessively deteriorated
- Steering rack gaiter or ball joint dust cover: damaged or deteriorated
- A steering ball joint: with excessive wear or free play
- Steering box: leaking oil
Visibility
▲ 49.5% better
10.7 faults / 100 tests
Year avg: 21.2 / 100 tests
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
- A bonnet: which cannot be safely secured in the closed position
- Wiper blade: missing or obviously not clearing the windscreen
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- Wiper blade: defective
Lights & Electrics
▲ 45.0% better
32.7 faults / 100 tests
Year avg: 59.5 / 100 tests
- A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
- Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
- Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
- A battery insecure: but not likely to fall from carrier
- A direction indicator: lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning
Wheels & Suspension
▲ 29.2% better
124.9 faults / 100 tests
Year avg: 176.5 / 100 tests
- A suspension pin, bush, joint or bearing: excessively worn
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- A shock absorber bush excessively worn
- A wheel bearing: with excessive play
- A spring: or spring component fractured or seriously weakened
Body/Structure
▼ 15.0% worse
73.7 faults / 100 tests
Year avg: 64.1 / 100 tests
- Body, cab or chassis: excessively corroded at mounting points
- A transmission: joint, belt or chain excessively worn
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- Exhaust system has a major leak or is insecure
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
Equipment
▲ 44.6% better
10.2 faults / 100 tests
Year avg: 18.4 / 100 tests
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- Seat belt buckle missing, damaged or not functioning as intended
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- A seat belt:
- The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): anchorage likely to become detached in the event of a collision
Other
▼ 49.3% worse
79.0 faults / 100 tests
Year avg: 52.9 / 100 tests
- Exhaust noise levels in excess of those permitted
- Emissions levels exceed default limits
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- Emissions levels exceed default limits
- An induction or exhaust leak that could affect emissions levels
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 136
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 76
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 46
A wheel bearing: with excessive play
ADVISORY
Occurrences: 39
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 35
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
ADVISORY
Occurrences: 34
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 33
Body, cab or chassis: excessively corroded at mounting points
ADVISORY
Occurrences: 30
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 30
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 26
Serious faults (Top 10)
Brake pipe damaged or excessively corroded
FAIL
Occurrences: 15
Emissions levels exceed default limits
FAIL
Occurrences: 9
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 9
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
FAIL
Occurrences: 9
A suspension joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 8
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 7
A wheel bearing: with excessive play
FAIL
Occurrences: 7
Body, cab or chassis: excessively corroded at mounting points
FAIL
Occurrences: 7
Brake hose ferrules: excessively corroded
FAIL
Occurrences: 7
is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
FAIL
Occurrences: 6