Lamborghini AVENTADOR - 2018
28.1 faults per 100 tests
Year average for all cars of 2018 is 123.2 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Lamborghini AVENTADOR, model year 2018.
Sample size: 178 cars, 534 tests and 150 recorded faults.
0%
Less faults compared to the average car of same model year
Less faults compared to the average car of same model year
Quick summary
Total: 178 cars
The 2018 Lamborghini Aventador demonstrates an impressively low overall defect rate, with 28 defects per 100 vehicles, significantly better than the yearly average of 120 defects per 100 vehicles, marking a 76.6% improvement. Notably, the Aventador excels in several categories, including brakes and steering, where it has virtually no reported defects compared to the average. It also performs well regarding visibility and lights, although it shows a higher rate of issues in wheels, suspensions, and axles. Mileage data suggests that among the lower mileage groups, the Aventador continues to maintain a relatively low defect rate, indicating strong reliability in its early years.
Cars by mileage segment
Total: 178 cars
More model years for Lamborghini AVENTADOR
Other models from Lamborghini
Categories
Brakes
▲ 99.4% better
0.4 faults / 100 tests
Year avg: 68.8 / 100 tests
- Brake lining or pad: worn below 1.5mm
Steering
▲ 100.0% better
0.0 faults / 100 tests
Year avg: 5.0 / 100 tests
Visibility
▲ 92.1% better
1.1 faults / 100 tests
Year avg: 13.9 / 100 tests
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
Lights & Electrics
▲ 63.6% better
6.4 faults / 100 tests
Year avg: 17.6 / 100 tests
- Reflector defective or damaged: by more than 50% of the reflecting surface
- A registration plate lamp: not securely attached
- A rear registration plate lamp or light source missing or inoperative: when rear registration plate has only one lamp or all lamps not working
- The aim of a headlamp is not within limits laid down in the requirements
Wheels & Suspension
▲ 66.6% better
42.3 faults / 100 tests
Year avg: 126.7 / 100 tests
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- A wheel bearing: with excessive play
- Tyre tread depth not in accordance with the requirements
- A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
- A wheel: badly distorted or wear between wheel and hub at spigot mounting
Body/Structure
▲ 100.0% better
0.0 faults / 100 tests
Year avg: 5.1 / 100 tests
Equipment
▲ 100.0% better
0.0 faults / 100 tests
Year avg: 2.2 / 100 tests
Other
▲ 14.3% better
6.0 faults / 100 tests
Year avg: 7.0 / 100 tests
- Emissions levels exceed default limits
- Exhaust noise levels in excess of those permitted
- Engine MIL inoperative or indicating a malfunction
- Lambda coefficient outside the default limits or the range specified by the manufacturer
- Emissions levels exceed the manufacturer’s specified limits
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 62
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 25
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
ADVISORY
Occurrences: 9
A wheel bearing: with excessive play
ADVISORY
Occurrences: 8
Emissions levels exceed default limits
FAIL
Occurrences: 6
A rear registration plate lamp or light source missing or inoperative: when rear registration plate has only one lamp or all lamps not working
PRS
Occurrences: 6
A wheel: badly distorted or wear between wheel and hub at spigot mounting
ADVISORY
Occurrences: 4
Reflector defective or damaged: by more than 50% of the reflecting surface
FAIL
Occurrences: 4
The aim of a headlamp is not within limits laid down in the requirements
FAIL
Occurrences: 4
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 3
Serious faults (Top 10)
Emissions levels exceed default limits
FAIL
Occurrences: 6
The aim of a headlamp is not within limits laid down in the requirements
FAIL
Occurrences: 4
Reflector defective or damaged: by more than 50% of the reflecting surface
FAIL
Occurrences: 4
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 3
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
FAIL
Occurrences: 3
Engine MIL inoperative or indicating a malfunction
FAIL
Occurrences: 2
Exhaust noise levels in excess of those permitted
FAIL
Occurrences: 2
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 2
Emissions levels exceed the manufacturer’s specified limits
FAIL
Occurrences: 2
Emissions test unable to be completed
FAIL
Occurrences: 1