Skip to main content

Jaguar XJ - 2001

272.0 faults per 100 tests
Year average for all cars of 2001 is 372.8 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Jaguar XJ, model year 2001. Sample size: 761 cars, 1,520 tests and 4,135 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 761 cars

The 2001 Jaguar XJ demonstrates a lower overall defect rate compared to the average car of the same year, with 272 defects per 100 vehicles versus the average of 369. This model particularly excels in categories like brakes and steering, showing significantly fewer defects, with 94% and 13% respectively, compared to the averages of 167% and 24%. Mileage trends reveal that while defects increase with higher mileage, the Jaguar maintains a relatively strong performance across all segments, especially in the highest mileage range of over 124,000 miles, where it has a defect rate of 551. Overall, the XJ stands out for its reliability in critical areas while showing a commendably lower defect rate than its peers.

Cars by mileage segment

Total: 761 cars

Categories

Brakes
▲ 43.8% better
93.8 faults / 100 tests
Year avg: 167.0 / 100 tests
  • Brake pipe damaged or excessively corroded
  • Brake lining or pad: worn below 1.5mm
  • Warning device shows system malfunction
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
Steering
▲ 46.8% better
13.3 faults / 100 tests
Year avg: 25.0 / 100 tests
  • Power steering fluid leaking or system malfunctioning
  • A steering ball joint: with excessive wear or free play
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • A steering ball joint: with excessive wear or free play
  • Power steering pipe, hose or wiring: excessively damaged or corroded
Visibility
▲ 32.0% better
20.0 faults / 100 tests
Year avg: 29.4 / 100 tests
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Obligatory mirror or device: slightly damaged or loose
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Wiper blade: missing or obviously not clearing the windscreen
  • Wiper blade: defective
Lights & Electrics
▲ 76.4% better
20.8 faults / 100 tests
Year avg: 88.1 / 100 tests
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
  • A headlamp: missing, inoperative or more than ½ not functioning in the case of LED
  • A headlamp: missing, inoperative or more than ½ not functioning in the case of LED
  • The aim of a headlamp is not within limits laid down in the requirements
  • The aim of a headlamp is not within limits laid down in the requirements
Wheels & Suspension
▲ 2.4% better
285.4 faults / 100 tests
Year avg: 292.4 / 100 tests
  • A suspension pin, bush, joint or bearing: excessively worn
  • Tyre tread depth not in accordance with the requirements
  • A suspension component: excessively damaged or corroded
  • The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
Body/Structure
▲ 2.1% better
70.4 faults / 100 tests
Year avg: 71.9 / 100 tests
  • Body, cab or chassis: excessively corroded at mounting points
  • Exhaust system has a major leak or is insecure
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • A transmission: joint, belt or chain excessively worn
Equipment
▲ 53.4% better
7.5 faults / 100 tests
Year avg: 16.1 / 100 tests
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): anchorage likely to become detached in the event of a collision
  • Seat belt not functioning as intended or of an incorrect type
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • A seat belt: webbing or flexible stalk significantly stretched or weakened
Other
▲ 40.8% better
32.9 faults / 100 tests
Year avg: 55.6 / 100 tests
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Lambda coefficient outside the default limits or the range specified by the manufacturer
  • Engine MIL inoperative or indicating a malfunction
  • Engine MIL inoperative or indicating a malfunction
  • Emissions levels exceed default limits

Fault rate by mileage segment

Model    Year average
0 551 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 352
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
ADVISORY
Occurrences: 299
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 289
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 263
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 234
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 225
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
ADVISORY
Occurrences: 170
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 164
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 156
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 141

Serious faults (Top 10)

The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 141
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
FAIL
Occurrences: 73
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 41
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 40
Engine MIL inoperative or indicating a malfunction
FAIL
Occurrences: 34
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 32
Body, cab or chassis: excessively corroded at mounting points
FAIL
Occurrences: 29
is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
FAIL
Occurrences: 25
Warning device shows system malfunction
FAIL
Occurrences: 24
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 23