Skip to main content

Jaguar X-TYPE - 2008

348.1 faults per 100 tests
Year average for all cars of 2008 is 340.8 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Jaguar X-TYPE, model year 2008. Sample size: 4,589 cars, 10,183 tests and 35,444 recorded faults.
0%
More faults compared to the average car of same model year

Quick summary

Total: 4,589 cars

The 2008 Jaguar X-Type shows a slightly higher overall defect rate at 348 per 100 vehicles, compared to the average of 337 per 100. This model particularly excels in steering and visibility, with defect rates significantly lower than the average, indicating fewer issues in these areas. However, it struggles with wheels, suspensions, and axles, where it has a notably higher defect rate than the average car. Mileage trends reveal that the defect rate increases with mileage, particularly for those over 124,000 miles, where it peaks at 504 per 100 vehicles. Overall, while the X-Type performs well in some categories, it faces challenges in specific mechanical aspects.

Cars by mileage segment

Total: 4,589 cars

Categories

Brakes
▼ 0.2% worse
133.3 faults / 100 tests
Year avg: 133.1 / 100 tests
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Brake hose ferrules: excessively corroded
  • Brake disc or drum: significantly and obviously worn
  • Brake lining or pad: worn below 1.5mm
  • Brake pipe damaged or excessively corroded
Steering
▲ 72.8% better
4.9 faults / 100 tests
Year avg: 18.0 / 100 tests
  • A steering ball joint: with excessive wear or free play
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • Free play in the steering, measured at the rim of the steering wheel is: excessive
  • A steering ball joint: with excessive wear or free play
  • Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
Visibility
▲ 28.5% better
18.1 faults / 100 tests
Year avg: 25.3 / 100 tests
  • Wiper blade: missing or obviously not clearing the windscreen
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Wiper blade: defective
  • Wiper blade: missing or obviously not clearing the windscreen
Lights & Electrics
▲ 53.1% better
43.2 faults / 100 tests
Year avg: 92.2 / 100 tests
  • Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
  • The aim of a headlamp is not within limits laid down in the requirements
  • Lamp emitted colour, position or intensity not in accordance with the requirements
  • A headlamp: missing, inoperative or more than ½ not functioning in the case of LED
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
Wheels & Suspension
▼ 30.3% worse
404.2 faults / 100 tests
Year avg: 310.3 / 100 tests
  • A suspension pin, bush, joint or bearing: excessively worn
  • Tyre tread depth not in accordance with the requirements
  • A spring: or spring component fractured or seriously weakened
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A suspension component: excessively damaged or corroded
Body/Structure
▲ 3.7% better
49.4 faults / 100 tests
Year avg: 51.3 / 100 tests
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • Body, cab or chassis: excessively corroded at mounting points
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • A transmission shaft constant velocity joint boot: severely deteriorated
  • Body, cab or chassis: excessively corroded at mounting points
Equipment
▼ 47.5% worse
14.9 faults / 100 tests
Year avg: 10.1 / 100 tests
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • A seat belt:
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • A seat belt: webbing or flexible stalk significantly stretched or weakened
  • Seat belt not functioning as intended or of an incorrect type
Other
▲ 31.6% better
28.2 faults / 100 tests
Year avg: 41.2 / 100 tests
  • Smoke opacity levels exceed the manufacturer’s specified limit
  • Smoke opacity levels exceed default limit
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Engine MIL inoperative or indicating a malfunction
  • Engine MIL inoperative or indicating a malfunction

Fault rate by mileage segment

Model    Year average
0 504 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 4,482
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 2,753
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 2,522
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 2,204
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 1,907
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 1,518
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
ADVISORY
Occurrences: 1,056
A shock absorber damaged … or showing signs of severe leakage
ADVISORY
Occurrences: 1,028
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
ADVISORY
Occurrences: 989
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 882

Serious faults (Top 10)

The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 788
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 556
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 453
is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
FAIL
Occurrences: 393
A suspension component: excessively damaged or corroded
FAIL
Occurrences: 357
A suspension joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 341
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
FAIL
Occurrences: 328
A spring: or spring component fractured or seriously weakened
FAIL
Occurrences: 268
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 248
Parking brake efficiency: below minimum requirement
FAIL
Occurrences: 217