Hyundai I800 - 2010
325.4 faults per 100 tests
Year average for all cars of 2010 is 296.9 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Hyundai I800, model year 2010.
Sample size: 445 cars, 1,032 tests and 3,358 recorded faults.
0%
More faults compared to the average car of same model year
More faults compared to the average car of same model year
Quick summary
Total: 445 cars
The 2010 Hyundai i800 has a higher overall defect rate of 325 per 100 vehicles, which is 11% above the average for its year at 294 per 100. This model shows significant issues with brakes, having a failure rate of 210 per 100 compared to the average of 118, and performs poorly in steering and equipment categories as well. Conversely, it excels in body and structure defects, with only 16 per 100, a marked improvement over the average of 35. Mileage trends indicate that defect rates increase with mileage, particularly in the 124,000+ miles category, where the i800's rate is notably high at 533 per 100.
Cars by mileage segment
Total: 445 cars
More model years for Hyundai I800
Other models from Hyundai
Categories
Brakes
▼ 82.9% worse
210.1 faults / 100 tests
Year avg: 114.9 / 100 tests
- Brake pipe damaged or excessively corroded
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake lining or pad: worn below 1.5mm
Steering
▼ 100.6% worse
33.9 faults / 100 tests
Year avg: 16.9 / 100 tests
Visibility
▲ 16.1% better
18.8 faults / 100 tests
Year avg: 22.4 / 100 tests
Lights & Electrics
▼ 17.1% worse
90.9 faults / 100 tests
Year avg: 77.6 / 100 tests
- A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
Wheels & Suspension
▲ 20.3% better
227.5 faults / 100 tests
Year avg: 285.3 / 100 tests
- Tyre tread depth not in accordance with the requirements
- A spring: or spring component fractured or seriously weakened
- A suspension component: excessively damaged or corroded
- A suspension pin, bush, joint or bearing: excessively worn
- A suspension pin, bush, joint or bearing: excessively worn
Body/Structure
▲ 55.6% better
16.1 faults / 100 tests
Year avg: 36.3 / 100 tests
Equipment
▼ 40.7% worse
11.4 faults / 100 tests
Year avg: 8.1 / 100 tests
Other
▼ 27.9% worse
41.3 faults / 100 tests
Year avg: 32.3 / 100 tests
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 275
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 261
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 216
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 188
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 179
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 160
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 148
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 114
A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
MINOR
Occurrences: 106
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 93
Serious faults (Top 10)
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 114
Parking brake efficiency: below minimum requirement
FAIL
Occurrences: 62
Parking brake inoperative on one side, or in the case of testing on the road, the vehicle deviates excessively from a straight line
FAIL
Occurrences: 55
Significant brake effort recorded with no brake applied indicating a binding brake
FAIL
Occurrences: 43
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 41
Brake pipe damaged or excessively corroded
FAIL
Occurrences: 34
Beam image obviously incorrect
FAIL
Occurrences: 32
A steering ball joint: with excessive wear or free play
FAIL
Occurrences: 26
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 26
The aim of a headlamp is not within limits laid down in the requirements
FAIL
Occurrences: 25