Hyundai COUPE - 2002
455.6 faults per 100 tests
Year average for all cars of 2002 is 375.3 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Hyundai COUPE, model year 2002.
Sample size: 109 cars, 223 tests and 1,016 recorded faults.
0%
More faults compared to the average car of same model year
More faults compared to the average car of same model year
Quick summary
Total: 109 cars
The 2002 Hyundai Coupe has an overall defect rate of 456 defects per 100 vehicles, which is 22% higher than the average for cars of the same year. This model shows particularly high issues with brakes, where it fails at a rate of 293 per 100 vehicles compared to the average of 170, and also has increased problems in body structure and other categories. However, the Hyundai Coupe performs better than average in visibility and equipment defects, indicating fewer issues in these areas. Mileage trends reveal that as the vehicle ages, defects remain consistently high, especially in the lower mileage categories.
Cars by mileage segment
Total: 109 cars
More model years for Hyundai COUPE
Other models from Hyundai
Categories
Brakes
▼ 75.6% worse
293.3 faults / 100 tests
Year avg: 167.0 / 100 tests
- Brake pipe damaged or excessively corroded
- Brake disc or drum: insecure, fractured or otherwise likely to fail
Steering
▲ 7.9% better
23.3 faults / 100 tests
Year avg: 25.3 / 100 tests
Visibility
▲ 24.3% better
22.4 faults / 100 tests
Year avg: 29.6 / 100 tests
Lights & Electrics
▲ 10.3% better
86.1 faults / 100 tests
Year avg: 96.0 / 100 tests
Wheels & Suspension
▼ 12.4% worse
331.8 faults / 100 tests
Year avg: 295.2 / 100 tests
- A suspension component: excessively damaged or corroded
- A suspension pin, bush, joint or bearing: excessively worn
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- Tyre tread depth not in accordance with the requirements
- A spring: or spring component fractured or seriously weakened
Body/Structure
▼ 17.1% worse
80.7 faults / 100 tests
Year avg: 68.9 / 100 tests
- A transmission shaft constant velocity joint boot: severely deteriorated
- Exhaust system has a major leak or is insecure
Equipment
▲ 57.7% better
6.3 faults / 100 tests
Year avg: 14.9 / 100 tests
Other
▼ 25.6% worse
67.3 faults / 100 tests
Year avg: 53.6 / 100 tests
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 98
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 83
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 56
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 53
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 51
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 50
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 42
A transmission shaft constant velocity joint boot: severely deteriorated
MINOR
Occurrences: 32
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 29
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 25
Serious faults (Top 10)
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 24
Parking brake efficiency: below minimum requirement
FAIL
Occurrences: 24
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 19
Brakes imbalance across an axle such that: the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle. Or in the case of testing on the road, the vehicle deviates excessively from a straight lin
FAIL
Occurrences: 11
Brake pipe damaged or excessively corroded
FAIL
Occurrences: 10
Parking brake inoperative on one side, or in the case of testing on the road, the vehicle deviates excessively from a straight line
FAIL
Occurrences: 10
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 9
Parking brake efficiency: less than 50% of the required value
FAIL
Occurrences: 8
Beam image obviously incorrect
FAIL
Occurrences: 8
A suspension component: excessively damaged or corroded
FAIL
Occurrences: 8