Honda FIT - 2016
Less faults compared to the average car of same model year
Quick summary
The 2016 Honda Fit has a significantly lower overall defect rate compared to the average car of the same year, with 72 defects per 100 vehicles, which is 52% better than the average of 151 defects. The model excels in categories such as brakes and steering, showing remarkably fewer issues than average, with no defects recorded in steering and only 11% in brakes compared to the average of 77%. However, it has a higher rate of defects in lights and electrics at 41%, which is notably worse than the average of 24%. Mileage trends indicate that as mileage increases, the defect rates also rise, particularly over 124,000 miles where defects jump to 430 per 100 vehicles. Overall, the Honda Fit stands out for its reliability, particularly in critical safety areas, despite some weaknesses in electrical components.
Cars by mileage segment
More model years for Honda FIT
Other models from Honda
Categories
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake lining or pad: worn below 1.5mm
- Brake pipe damaged or excessively corroded
- Parking brake control missing, defective or inoperative
- Excessive fluctuation in brake effort through each wheel revolution
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
- Wiper blade: missing or obviously not clearing the windscreen
- An obstruction: materially affecting the driver’s view of the road through the swept area of the windscreen or an obligatory external mirror not visible
- Wiper blade: missing or obviously not clearing the windscreen
- Headlamp reflector or lens: slightly defective
- A direction indicator: lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning
- Front or rear fog lamp switch:
- An obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning
- Lamp emitted colour, position or intensity not in accordance with the requirements
- Tyre tread depth not in accordance with the requirements
- A suspension joint dust cover: severely deteriorated
- A shock absorber damaged … or showing signs of severe leakage
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
- An SRS malfunction indicator lamp (MIL) indicates a system malfunction
- Engine MIL inoperative or indicating a malfunction