Honda CR-V - 2000
477.4 faults per 100 tests
Year average for all cars of 2000 is 366.2 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Honda CR-V, model year 2000.
Sample size: 706 cars, 1,466 tests and 6,999 recorded faults.
0%
More faults compared to the average car of same model year
More faults compared to the average car of same model year
Quick summary
Total: 706 cars
The 2000 Honda CR-V has a notable defect rate of 477 defects per 100 vehicles, which is 31.8% higher than the average for similar cars of the same year, at 362 defects per 100. The data reveals that as mileage increases, the defect rate also rises significantly, especially in the 93,000 to 124,000-mile range. While the Honda CR-V performs better in the brakes category, showing a lower defect rate compared to the average, it struggles with lights and electrics, wheels, suspensions, axles, and other issues, where it exhibits higher defect rates than its peers. Overall, the model's performance suggests it may require more attention in specific areas despite its reliable braking system.
Cars by mileage segment
Total: 706 cars
Categories
Brakes
▲ 36.5% better
103.4 faults / 100 tests
Year avg: 162.9 / 100 tests
- Brake pipe damaged or excessively corroded
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake pipe damaged or excessively corroded
- Brake lining or pad: worn below 1.5mm
- Brake hose ferrules: excessively corroded
Steering
▲ 13.1% better
23.3 faults / 100 tests
Year avg: 26.8 / 100 tests
- Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
- A steering ball joint: with excessive wear or free play
- A steering ball joint: with excessive wear or free play
- Steering rack gaiter or ball joint dust cover: damaged or deteriorated
- Power steering fluid leaking or system malfunctioning
Visibility
▼ 6.7% worse
30.4 faults / 100 tests
Year avg: 28.5 / 100 tests
- Wiper blade: missing or obviously not clearing the windscreen
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
- Wiper blade: defective
- Wiper blade: missing or obviously not clearing the windscreen
Lights & Electrics
▼ 40.2% worse
112.0 faults / 100 tests
Year avg: 79.9 / 100 tests
- Headlamp reflector or lens: slightly defective
- Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
- Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
- A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
- Beam image obviously incorrect
Wheels & Suspension
▼ 79.8% worse
507.4 faults / 100 tests
Year avg: 282.2 / 100 tests
- Tyre tread depth not in accordance with the requirements
- A spring: or spring component fractured or seriously weakened
- A suspension pin, bush, joint or bearing: excessively worn
- A suspension component: excessively damaged or corroded
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
Body/Structure
▲ 0.7% better
75.6 faults / 100 tests
Year avg: 76.1 / 100 tests
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- A transmission shaft constant velocity joint boot: severely deteriorated
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- Exhaust system has a major leak or is insecure
- Exhaust system has a major leak or is insecure
Equipment
▼ 11.9% worse
19.8 faults / 100 tests
Year avg: 17.7 / 100 tests
- A seat belt: webbing or flexible stalk significantly stretched or weakened
- A seat belt:
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- A seat belt: or flexible stalk damaged
Other
▼ 42.8% worse
82.8 faults / 100 tests
Year avg: 58.0 / 100 tests
- Emissions levels exceed default limits
- Lambda coefficient outside the default limits or the range specified by the manufacturer
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- Emissions levels exceed the manufacturer’s specified limits
- Emissions test unable to be completed
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 997
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 430
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 423
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 354
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 341
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 311
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 292
A suspension joint dust cover: severely deteriorated
MINOR
Occurrences: 271
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 265
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 179
Serious faults (Top 10)
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 265
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 179
Beam image obviously incorrect
FAIL
Occurrences: 70
Emissions levels exceed default limits
FAIL
Occurrences: 63
Stop lamp(s): all missing or inoperative
FAIL
Occurrences: 58
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 58
A suspension joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 54
Emissions levels exceed the manufacturer’s specified limits
FAIL
Occurrences: 53
Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 51
is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
FAIL
Occurrences: 48