Honda CIVIC - 1991
262.8 faults per 100 tests
Year average for all cars of 1991 is 263.4 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Honda CIVIC, model year 1991.
Sample size: 275 cars, 500 tests and 1,314 recorded faults.
0%
More faults compared to the average car of same model year
More faults compared to the average car of same model year
Quick summary
Total: 275 cars
The 1991 Honda Civic exhibits a slightly lower overall defect rate compared to the average car of the same year, with 263 defects per 100 vehicles against an average of 263. The model shows a notable increase in defects with higher mileage, particularly in the 93,000 to 124,000-mile range, where it exceeds the average defect rate significantly. However, the Civic performs better in key areas such as brakes, lights and electrics, and equipment, with defect rates well below the average for those categories. There are no specific categories where the model stands out negatively, suggesting a balanced performance.
Cars by mileage segment
Total: 275 cars
Categories
Brakes
▲ 20.9% better
83.2 faults / 100 tests
Year avg: 105.2 / 100 tests
- Brake pipe damaged or excessively corroded
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake hose ferrules: excessively corroded
- Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
- Significant brake effort recorded with no brake applied indicating a binding brake
Steering
▼ 18.6% worse
34.4 faults / 100 tests
Year avg: 29.0 / 100 tests
- Steering rack gaiter or ball joint dust cover: damaged or deteriorated
- Free play in the steering, measured at the rim of the steering wheel is: excessive
- Power steering fluid leaking or system malfunctioning
- A steering ball joint: with excessive wear or free play
- Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
Visibility
▼ 5.7% worse
22.4 faults / 100 tests
Year avg: 21.2 / 100 tests
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- Wiper blade: missing or obviously not clearing the windscreen
- Wiper blade: missing or obviously not clearing the windscreen
- Wiper blade: defective
Lights & Electrics
▲ 23.4% better
45.6 faults / 100 tests
Year avg: 59.5 / 100 tests
- Lamp: emitted colour, position or intensity not in accordance with the requirements
- The aim of a headlamp is not within limits laid down in the requirements
- A lamp adversely affected by the operation of any other lamp
- Stop lamp(s): with a multiple light source up to 1/2 not functioning
- Beam image obviously incorrect
Wheels & Suspension
▼ 18.1% worse
208.4 faults / 100 tests
Year avg: 176.5 / 100 tests
- A suspension pin, bush, joint or bearing: excessively worn
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
- Tyre tread depth not in accordance with the requirements
- A suspension joint dust cover: severely deteriorated
Body/Structure
▼ 17.3% worse
75.2 faults / 100 tests
Year avg: 64.1 / 100 tests
- A transmission shaft constant velocity joint boot: severely deteriorated
- A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
- Exhaust system has a major leak or is insecure
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- Body, cab or chassis: excessively corroded at mounting points
Equipment
▲ 45.7% better
10.0 faults / 100 tests
Year avg: 18.4 / 100 tests
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- A seat belt:
- Seat belt buckle missing, damaged or not functioning as intended
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- Audible warning:
Other
▲ 13.0% better
46.0 faults / 100 tests
Year avg: 52.9 / 100 tests
- Exhaust noise levels in excess of those permitted
- Exhaust emits excessive dense blue or clearly visible black smoke during acceleration which would obscure the view of other road users
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- Emissions levels exceed default limits
- Emissions test unable to be completed
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 150
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 81
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 72
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 68
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 60
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 52
A transmission shaft constant velocity joint boot: severely deteriorated
MINOR
Occurrences: 44
A suspension joint dust cover: severely deteriorated
MINOR
Occurrences: 40
Steering rack gaiter or ball joint dust cover: damaged or deteriorated
MINOR
Occurrences: 37
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
ADVISORY
Occurrences: 36
Serious faults (Top 10)
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 27
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 18
A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
FAIL
Occurrences: 16
Emissions levels exceed default limits
FAIL
Occurrences: 11
is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
FAIL
Occurrences: 9
Body, cab or chassis: excessively corroded at mounting points
FAIL
Occurrences: 9
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
FAIL
Occurrences: 9
Significant brake effort recorded with no brake applied indicating a binding brake
FAIL
Occurrences: 8
Wiper blade: missing or obviously not clearing the windscreen
FAIL
Occurrences: 8
Parking brake efficiency: below minimum requirement
FAIL
Occurrences: 8