Ford S-MAX - 2006
456.7 faults per 100 tests
Year average for all cars of 2006 is 371.9 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Ford S-MAX, model year 2006.
Sample size: 1,371 cars, 2,912 tests and 13,300 recorded faults.
0%
More faults compared to the average car of same model year
More faults compared to the average car of same model year
Quick summary
Total: 1,371 cars
The 2006 Ford S-MAX has a higher overall defect rate than the average car from the same year, with 457 defects per 100 vehicles compared to the average of 369. Notably, the S-MAX shows a significant increase in issues related to wheels, suspensions, and axles, which are 48% worse than average. Additionally, equipment-related defects are also considerably higher, showing a 96% increase compared to the average. There does not appear to be a strong correlation between mileage and defect rates, as the model's defect rate remains elevated across all mileage categories.
Cars by mileage segment
Total: 1,371 cars
More model years for Ford S-MAX
Other models from Ford
Categories
Brakes
▲ 8.5% better
141.0 faults / 100 tests
Year avg: 154.1 / 100 tests
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake pipe damaged or excessively corroded
- Excessive fluctuation in brake effort through each wheel revolution
- Brake lining or pad: worn below 1.5mm
- Brake disc or drum: significantly and obviously worn
Steering
▼ 17.3% worse
23.7 faults / 100 tests
Year avg: 20.2 / 100 tests
- A steering ball joint: with excessive wear or free play
- Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
- Power steering fluid leaking or system malfunctioning
- A steering ball joint: with excessive wear or free play
- Steering rack gaiter or ball joint dust cover: damaged or deteriorated
Visibility
▲ 5.8% better
26.1 faults / 100 tests
Year avg: 27.7 / 100 tests
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- Wiper blade: missing or obviously not clearing the windscreen
- Obligatory mirror or device: slightly damaged or loose
- Wiper blade: defective
Lights & Electrics
▼ 16.2% worse
129.1 faults / 100 tests
Year avg: 111.1 / 100 tests
- Headlamp reflector or lens: slightly defective
- Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
- A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
- Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
- Beam image obviously incorrect
Wheels & Suspension
▼ 45.9% worse
458.8 faults / 100 tests
Year avg: 314.5 / 100 tests
- A suspension pin, bush, joint or bearing: excessively worn
- A spring: or spring component fractured or seriously weakened
- Tyre tread depth not in accordance with the requirements
- A suspension component: excessively damaged or corroded
- The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
Body/Structure
▲ 3.5% better
57.4 faults / 100 tests
Year avg: 59.5 / 100 tests
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- A transmission shaft constant velocity joint boot: severely deteriorated
- Exhaust system has a major leak or is insecure
- Exhaust system has a major leak or is insecure
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
Equipment
▼ 90.7% worse
22.5 faults / 100 tests
Year avg: 11.8 / 100 tests
- A seat belt: webbing or flexible stalk significantly stretched or weakened
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- A seat belt:
- An SRS malfunction indicator lamp (MIL) indicates a system malfunction
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
Other
▼ 22.8% worse
54.9 faults / 100 tests
Year avg: 44.7 / 100 tests
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- Emissions test unable to be completed
- Emissions test unable to be completed
- Smoke opacity levels exceed the manufacturer’s specified limit
- Engine MIL inoperative or indicating a malfunction
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 1,475
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 1,090
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 902
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 680
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 550
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 532
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 487
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 356
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
ADVISORY
Occurrences: 332
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 324
Serious faults (Top 10)
A suspension component: excessively damaged or corroded
FAIL
Occurrences: 247
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 212
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 145
A suspension joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 141
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 135
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 127
Exhaust system has a major leak or is insecure
FAIL
Occurrences: 121
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 120
Beam image obviously incorrect
FAIL
Occurrences: 106
Stop lamp(s): all missing or inoperative
FAIL
Occurrences: 105