Ford KA - 2002
399.1 faults per 100 tests
Year average for all cars of 2002 is 375.3 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Ford KA, model year 2002.
Sample size: 863 cars, 1,807 tests and 7,211 recorded faults.
0%
More faults compared to the average car of same model year
More faults compared to the average car of same model year
Quick summary
Total: 863 cars
The 2002 Ford KA has an overall defect rate of 399 per 100 vehicles, which is 6.6% higher than the average for its year. Notably, this model performs better than average in categories such as brakes and lights and electrics, showing significantly lower defect rates. However, it stands out negatively in wheels, suspensions, and axles, where its defect rate is considerably higher than the average. There is a clear trend indicating that as mileage increases, the defect rate for this model also rises, particularly evident in the highest mileage category.
Cars by mileage segment
Total: 863 cars
Categories
Brakes
▲ 30.7% better
115.8 faults / 100 tests
Year avg: 167.0 / 100 tests
- Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake lining or pad: worn below 1.5mm
- Brake pipe damaged or excessively corroded
- Brake hose ferrules: excessively corroded
Steering
▼ 13.0% worse
28.6 faults / 100 tests
Year avg: 25.3 / 100 tests
- Power steering pipe, hose or wiring: excessively damaged or corroded
- Steering rack gaiter or ball joint dust cover: damaged or deteriorated
- Power steering fluid leaking or system malfunctioning
- Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
- Power steering fluid leaking or system malfunctioning
Visibility
▼ 12.5% worse
33.3 faults / 100 tests
Year avg: 29.6 / 100 tests
- Wiper blade: defective
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
- Wiper blade: missing or obviously not clearing the windscreen
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- Wiper blade: missing or obviously not clearing the windscreen
Lights & Electrics
▲ 30.7% better
66.5 faults / 100 tests
Year avg: 96.0 / 100 tests
- Headlamp reflector or lens: slightly defective
- Beam image obviously incorrect
- Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
- Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
- A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
Wheels & Suspension
▼ 39.5% worse
411.7 faults / 100 tests
Year avg: 295.2 / 100 tests
- The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
- The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
- A suspension pin, bush, joint or bearing: excessively worn
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- Tyre tread depth not in accordance with the requirements
Body/Structure
▼ 15.2% worse
79.4 faults / 100 tests
Year avg: 68.9 / 100 tests
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- Body, cab or chassis: excessively corroded at mounting points
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- Body, cab or chassis: excessively corroded at mounting points
- Exhaust system has a major leak or is insecure
Equipment
▼ 40.9% worse
21.0 faults / 100 tests
Year avg: 14.9 / 100 tests
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- Audible warning:
- A seat belt:
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- A seat belt: webbing or flexible stalk significantly stretched or weakened
Other
▲ 22.2% better
41.7 faults / 100 tests
Year avg: 53.6 / 100 tests
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- Emissions levels exceed default limits
- Emissions test unable to be completed
- Engine MIL inoperative or indicating a malfunction
- Lambda coefficient outside the default limits or the range specified by the manufacturer
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 896
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
ADVISORY
Occurrences: 546
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 383
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 361
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 349
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 346
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
ADVISORY
Occurrences: 344
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 260
Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
ADVISORY
Occurrences: 210
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 196
Serious faults (Top 10)
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 361
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 260
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
FAIL
Occurrences: 106
is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
FAIL
Occurrences: 86
Body, cab or chassis: excessively corroded at mounting points
FAIL
Occurrences: 84
A spring: or spring component fractured or seriously weakened
FAIL
Occurrences: 78
Wiper blade: missing or obviously not clearing the windscreen
FAIL
Occurrences: 75
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 74
Beam image obviously incorrect
FAIL
Occurrences: 53
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 45