Ford GRAND C-MAX - 2010
359.6 faults per 100 tests
Year average for all cars of 2010 is 296.9 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Ford GRAND C-MAX, model year 2010.
Sample size: 121 cars, 255 tests and 917 recorded faults.
0%
More faults compared to the average car of same model year
More faults compared to the average car of same model year
Quick summary
Total: 121 cars
The 2010 Ford Grand C-Max has an overall defect rate of 360 per 100 vehicles, which is 22% higher than the average for cars of the same year at 294 per 100. This model displays particular strengths in steering and miscellaneous issues, showing significantly fewer defects in these categories compared to the average. However, it stands out negatively in the brakes, wheels, and body structure categories, where it has notably higher defect rates. Mileage trends indicate that the defect rate increases with higher mileage, particularly in the 124,000-mile category, suggesting potential reliability concerns as the vehicle ages.
Cars by mileage segment
Total: 121 cars
More model years for Ford GRAND C-MAX
Other models from Ford
Categories
Brakes
▼ 33.1% worse
152.9 faults / 100 tests
Year avg: 114.9 / 100 tests
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake lining or pad: worn below 1.5mm
- Parking brake efficiency: below minimum requirement
- Brake lining or pad: worn below 1.5mm
- Brake disc or drum: significantly and obviously worn
Steering
▲ 67.5% better
5.5 faults / 100 tests
Year avg: 16.9 / 100 tests
- A steering ball joint: with excessive wear or free play
- Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
- A steering ball joint: with excessive wear or free play
- Free play in the steering, measured at the rim of the steering wheel is: excessive
Visibility
▲ 8.9% better
20.4 faults / 100 tests
Year avg: 22.4 / 100 tests
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
- Wiper blade: defective
- Wiper blade: missing or obviously not clearing the windscreen
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
Lights & Electrics
▼ 3.1% worse
80.0 faults / 100 tests
Year avg: 77.6 / 100 tests
- A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
- The aim of a headlamp is not within limits laid down in the requirements
- Lamp emitted colour, position or intensity not in accordance with the requirements
- Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
- Stop lamp(s): all missing or inoperative
Wheels & Suspension
▼ 23.2% worse
351.4 faults / 100 tests
Year avg: 285.3 / 100 tests
- Tyre tread depth not in accordance with the requirements
- A suspension component: excessively damaged or corroded
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- A suspension pin, bush, joint or bearing: excessively worn
- A suspension pin, bush, joint or bearing: excessively worn
Body/Structure
▼ 94.5% worse
70.6 faults / 100 tests
Year avg: 36.3 / 100 tests
- A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
- Exhaust system has a major leak or is insecure
- A transmission shaft constant velocity joint boot: severely deteriorated
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- An engine mounting or bracket: severely damaged or deteriorated resulting in excessive movement
Equipment
▼ 64.2% worse
13.3 faults / 100 tests
Year avg: 8.1 / 100 tests
- A seat belt:
- A seat belt: webbing or flexible stalk significantly stretched or weakened
- A seat belt:
- A seat belt: or flexible stalk damaged
- Audible warning:
Other
▲ 22.3% better
25.1 faults / 100 tests
Year avg: 32.3 / 100 tests
- Engine MIL inoperative or indicating a malfunction
- Engine MIL inoperative or indicating a malfunction
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- Engine MIL inoperative or indicating a malfunction
- Smoke opacity levels exceed the manufacturer’s specified limit
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 146
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 121
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 68
A transmission shaft constant velocity joint boot: severely deteriorated
MINOR
Occurrences: 63
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 61
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 36
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 28
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 27
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 22
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 21
Serious faults (Top 10)
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 27
Brake lining or pad: worn below 1.5mm
FAIL
Occurrences: 12
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 10
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 9
A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
FAIL
Occurrences: 9
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 9
Parking brake efficiency: below minimum requirement
FAIL
Occurrences: 7
A wheel: with a loose or missing wheel nut, bolt or stud
FAIL
Occurrences: 4
A suspension joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 4
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 4