Ford FUSION - 2006
More faults compared to the average car of same model year
Quick summary
The 2006 Ford Fusion exhibits a slightly higher overall defect rate compared to the average vehicle of the same year, with 377 defects per 100 cars, compared to 369 for the average. Notably, the model performs significantly better in the Body/Structure and Equipment categories, with defect rates of 41% and 4% respectively, compared to 58% and 11% for the average vehicle. However, it falls short in the Lights & Electrics category, showing a defect rate of 145%, which is higher than the average of 108%. There is a clear trend of increasing defect rates with mileage, particularly in the higher mileage categories. Overall, while the Ford Fusion has strengths in structural integrity and equipment reliability, it faces challenges in electrical issues as it ages.
Cars by mileage segment
More model years for Ford FUSION
Other models from Ford
Categories
- Brake pipe damaged or excessively corroded
- Brake pipe damaged or excessively corroded
- Brake hose ferrules: excessively corroded
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake lining or pad: worn below 1.5mm
- A steering ball joint: with excessive wear or free play
- Steering rack gaiter or ball joint dust cover: damaged or deteriorated
- A steering ball joint: with excessive wear or free play
- Power steering fluid leaking or system malfunctioning
- Power steering pipe, hose or wiring: excessively damaged or corroded
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
- Wiper blade: defective
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- Wiper blade: missing or obviously not clearing the windscreen
- Obligatory mirror or device: slightly damaged or loose
- Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
- Beam image obviously incorrect
- Lamp emitted colour, position or intensity not in accordance with the requirements
- Stop lamp(s): all missing or inoperative
- Headlamp reflector or lens: slightly defective
- Tyre tread depth not in accordance with the requirements
- A spring: or spring component fractured or seriously weakened
- A suspension component: excessively damaged or corroded
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- A suspension joint dust cover: severely deteriorated
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- A transmission shaft constant velocity joint boot: severely deteriorated
- Exhaust system has a major leak or is insecure
- A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
- Exhaust system has a major leak or is insecure
- A seat belt: webbing or flexible stalk significantly stretched or weakened
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- Audible warning:
- A seat belt:
- Seat belt not functioning as intended or of an incorrect type
- Engine MIL inoperative or indicating a malfunction
- Lambda coefficient outside the default limits or the range specified by the manufacturer
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- Emissions levels exceed default limits
- Emissions levels exceed the manufacturer’s specified limits