Ford FIESTA - 1994
312.8 faults per 100 tests
Year average for all cars of 1994 is 308.0 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Ford FIESTA, model year 1994.
Sample size: 211 cars, 399 tests and 1,248 recorded faults.
0%
More faults compared to the average car of same model year
More faults compared to the average car of same model year
Quick summary
Total: 211 cars
The 1994 Ford Fiesta shows a slightly higher overall defect rate at 313 defects per 100 vehicles compared to the annual average of 304 defects per 100 vehicles, marking a 3% increase. It stands out positively in the categories of Steering and Other, with significantly lower defect rates than the average, indicating better performance in those areas. However, it performs worse in Brakes and Wheels, Suspensions & Axles, with defect rates exceeding the average by 25% and 22% respectively. Mileage trends reveal that defect rates increase with mileage, particularly peaking in the 31,000 to 62,000 miles range for this model.
Cars by mileage segment
Total: 211 cars
Categories
Brakes
▼ 26.1% worse
151.4 faults / 100 tests
Year avg: 120.1 / 100 tests
- Brake pipe damaged or excessively corroded
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Service brake efficiency: below minimum requirement
- Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
- Significant brake effort recorded with no brake applied indicating a binding brake
Steering
▲ 49.4% better
16.0 faults / 100 tests
Year avg: 31.6 / 100 tests
- A steering ball joint: with excessive wear or free play
- Free play in the steering, measured at the rim of the steering wheel is: excessive
- Power steering fluid leaking or system malfunctioning
- Steering linkage retaining or locking device missing or ineffective
- Steering rack gaiter or ball joint dust cover: damaged or deteriorated
Visibility
▲ 0.4% better
24.1 faults / 100 tests
Year avg: 24.2 / 100 tests
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- Obligatory mirror or device: slightly damaged or loose
- Wiper blade: missing or obviously not clearing the windscreen
- Wiper blade: defective
Lights & Electrics
▲ 21.4% better
52.1 faults / 100 tests
Year avg: 66.3 / 100 tests
- Lamp emitted colour, position or intensity not in accordance with the requirements
- The aim of a headlamp is not within limits laid down in the requirements
- Lamp emitted colour, position or intensity not in accordance with the requirements
- Indicator or hazard warning switch: does not operate in accordance with the requirements
- Headlamp reflector or lens: slightly defective
Wheels & Suspension
▼ 21.9% worse
245.6 faults / 100 tests
Year avg: 201.4 / 100 tests
- The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
- Tyre tread depth not in accordance with the requirements
- A suspension pin, bush, joint or bearing: excessively worn
- A spring: or spring component fractured or seriously weakened
- The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
Body/Structure
▲ 12.0% better
72.2 faults / 100 tests
Year avg: 82.0 / 100 tests
- Exhaust system has a major leak or is insecure
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
- Exhaust system has a major leak or is insecure
- A transmission shaft constant velocity joint boot: severely deteriorated
Equipment
▼ 0.8% worse
25.1 faults / 100 tests
Year avg: 24.9 / 100 tests
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- Seat belt buckle missing, damaged or not functioning as intended
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- Seat belt buckle missing, damaged or not functioning as intended
- Audible warning:
Other
▲ 41.2% better
38.6 faults / 100 tests
Year avg: 65.7 / 100 tests
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- Emissions levels exceed the manufacturer’s specified limits
- Emissions test unable to be completed
- Emissions levels exceed default limits
- Lambda coefficient outside the default limits or the range specified by the manufacturer
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 136
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 86
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 61
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
ADVISORY
Occurrences: 61
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 60
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 57
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 46
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
ADVISORY
Occurrences: 42
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 35
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 33
Serious faults (Top 10)
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 57
is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
FAIL
Occurrences: 17
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 16
Exhaust system has a major leak or is insecure
FAIL
Occurrences: 16
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
FAIL
Occurrences: 15
Service brake efficiency: below minimum requirement
FAIL
Occurrences: 13
Emissions levels exceed default limits
FAIL
Occurrences: 12
Wiper blade: missing or obviously not clearing the windscreen
FAIL
Occurrences: 11
Emissions levels exceed the manufacturer’s specified limits
FAIL
Occurrences: 10
Brakes imbalance across an axle such that: the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle. Or in the case of testing on the road, the vehicle deviates excessively from a straight lin
FAIL
Occurrences: 10