Fiat FIORINO - 2013
More faults compared to the average car of same model year
Quick summary
The 2013 FIAT Fiorino has a significantly higher overall defect rate of 287 defects per 100 vehicles compared to the average of 219 defects per 100 vehicles, marking an increase of 31%. Notably, as the mileage increases, the defect rate for this model rises more sharply than for the average car, particularly in the 124,000+ miles range where it reaches 412 defects per 100 vehicles. While the Fiorino performs better in brake-related issues, with a defect rate of 76 compared to an average of 100, it shows worse performance in categories such as steering, visibility, and lights and electrics, where its defect rates are notably higher than average. Overall, this model's defect profile indicates specific vulnerabilities, especially as it accumulates mileage, making it less reliable compared to its peers.
Cars by mileage segment
More model years for Fiat FIORINO
Other models from Fiat
Categories
- Brake pipe damaged or excessively corroded
- Brake lining or pad: worn below 1.5mm
- Brake disc or drum: significantly and obviously worn
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake hose ferrules: excessively corroded
- Power steering fluid leaking or system malfunctioning
- Power steering fluid leaking or system malfunctioning
- Power steering fluid: level below minimum mark
- A steering ball joint: with excessive wear or free play
- A steering ball joint: with excessive wear or free play
- Obligatory mirror or device: slightly damaged or loose
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
- Wiper blade: missing or obviously not clearing the windscreen
- Wiper blade: defective
- A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
- Headlamp reflector or lens: slightly defective
- Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
- Lamp emitted colour, position or intensity not in accordance with the requirements
- Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
- Tyre tread depth not in accordance with the requirements
- A suspension pin, bush, joint or bearing: excessively worn
- A shock absorber bush excessively worn
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- A suspension component: excessively damaged or corroded
- Exhaust system has a major leak or is insecure
- A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
- Exhaust system has a major leak or is insecure
- A transmission shaft constant velocity joint boot: severely deteriorated
- Fuel system: leaking, or missing or ineffective filler cap
- An SRS malfunction indicator lamp (MIL) indicates a system malfunction
- A seat belt: webbing or flexible stalk significantly stretched or weakened
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
- Audible warning:
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- Smoke opacity levels exceed default limit
- Engine MIL inoperative or indicating a malfunction
- Engine MIL inoperative or indicating a malfunction
- Exhaust emits excessive smoke or vapour of any colour to an extent likely to obscure the vision of other road users