Skip to main content

Citroen C2 - 2003

359.4 faults per 100 tests
Year average for all cars of 2003 is 380.4 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Citroen C2, model year 2003. Sample size: 132 cars, 266 tests and 956 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 132 cars

The 2003 Citroën C2 has an overall defect rate of 359 per 100 vehicles, which is 5% lower than the average of similar cars from the same year. Notably, the C2 performs significantly better in the categories of steering and equipment, with defect rates of only 8 and 5 per 100, compared to the averages of 25 and 13 per 100, respectively. However, it struggles with lights and electrics, where its defect rate is higher than average at 135 per 100. Additionally, as mileage increases, the defect rate also rises, with the highest rate observed in vehicles with over 124,000 miles.

Cars by mileage segment

Total: 132 cars

Categories

Brakes
▲ 9.0% better
154.1 faults / 100 tests
Year avg: 169.3 / 100 tests
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Brake hose ferrules: excessively corroded
  • Significant brake effort recorded with no brake applied indicating a binding brake
  • Brake pipe damaged or excessively corroded
  • Brake lining or pad: worn below 1.5mm
Steering
▲ 70.2% better
7.5 faults / 100 tests
Year avg: 25.2 / 100 tests
  • A steering ball joint: with excessive wear or free play
  • A steering ball joint: worn to the extent there is a serious risk of detachment
  • Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
  • A steering ball joint: with excessive wear or free play
  • Free play in the steering, measured at the rim of the steering wheel is: excessive
Visibility
▼ 6.0% worse
31.6 faults / 100 tests
Year avg: 29.8 / 100 tests
  • Wiper blade: missing or obviously not clearing the windscreen
  • Obligatory mirror or device: slightly damaged or loose
  • Wiper blade: missing or obviously not clearing the windscreen
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Wiper blade: defective
Lights & Electrics
▼ 30.9% worse
134.6 faults / 100 tests
Year avg: 102.8 / 100 tests
  • Lamp emitted colour, position or intensity not in accordance with the requirements
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
  • Beam image obviously incorrect
  • A battery insecure: but not likely to fall from carrier
  • Headlamp reflector or lens: slightly defective
Wheels & Suspension
▲ 6.7% better
282.0 faults / 100 tests
Year avg: 302.1 / 100 tests
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A suspension pin, bush, joint or bearing: excessively worn
  • The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
  • Tyre tread depth not in accordance with the requirements
  • The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
Body/Structure
▲ 19.3% better
52.6 faults / 100 tests
Year avg: 65.2 / 100 tests
  • Exhaust system has a major leak or is insecure
  • A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
  • 6.1.1 (d) (i)
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
Equipment
▲ 66.9% better
4.5 faults / 100 tests
Year avg: 13.6 / 100 tests
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
Other
▲ 1.5% better
51.9 faults / 100 tests
Year avg: 52.7 / 100 tests
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Any part of the noise suppression system: insecure
  • An induction or exhaust leak that could affect emissions levels
  • Emissions levels exceed default limits
  • Emissions test unable to be completed

Fault rate by mileage segment

Model    Year average
0 541 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 66
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 64
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 59
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 54
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 53
Lamp emitted colour, position or intensity not in accordance with the requirements
ADVISORY
Occurrences: 43
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 39
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
ADVISORY
Occurrences: 37
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 28
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 19

Serious faults (Top 10)

The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 19
A suspension joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 16
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 13
Wiper blade: missing or obviously not clearing the windscreen
FAIL
Occurrences: 12
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 11
Beam image obviously incorrect
FAIL
Occurrences: 11
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 10
Brakes imbalance across an axle such that: the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle. Or in the case of testing on the road, the vehicle deviates excessively from a straight lin
FAIL
Occurrences: 10
A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
FAIL
Occurrences: 10
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 10