Chrysler GRAND VOYAGER - 2010
315.2 faults per 100 tests
Year average for all cars of 2010 is 296.9 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Chrysler GRAND VOYAGER, model year 2010.
Sample size: 283 cars, 665 tests and 2,096 recorded faults.
0%
More faults compared to the average car of same model year
More faults compared to the average car of same model year
Quick summary
Total: 283 cars
The 2010 Chrysler Grand Voyager has an overall defect rate of 315 per 100 vehicles, which is 7% higher than the average for its year. This model shows increasing defects with mileage, particularly in the 124,000+ miles category, where the rate reaches 425 per 100 vehicles. Notably, it has a significantly higher defect rate in brakes, steering, and equipment compared to the average, with defects in brakes being almost 50% higher. While tyre wear is a common issue across many vehicles, the Grand Voyager's specific weaknesses in these areas stand out compared to the yearly average.
Cars by mileage segment
Total: 283 cars
More model years for Chrysler GRAND VOYAGER
Other models from Chrysler
Categories
Brakes
▼ 53.6% worse
176.5 faults / 100 tests
Year avg: 114.9 / 100 tests
- Significant brake effort recorded with no brake applied indicating a binding brake
- Brake pipe damaged or excessively corroded
- Brake lining or pad: worn below 1.5mm
- Brake disc or drum: insecure, fractured or otherwise likely to fail
Steering
▼ 129.6% worse
38.8 faults / 100 tests
Year avg: 16.9 / 100 tests
Visibility
▼ 6.3% worse
23.8 faults / 100 tests
Year avg: 22.4 / 100 tests
Lights & Electrics
▼ 7.7% worse
83.6 faults / 100 tests
Year avg: 77.6 / 100 tests
- A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
Wheels & Suspension
▲ 20.8% better
225.9 faults / 100 tests
Year avg: 285.3 / 100 tests
- Tyre tread depth not in accordance with the requirements
- A suspension pin, bush, joint or bearing: excessively worn
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- A suspension component: excessively damaged or corroded
Body/Structure
▼ 1.1% worse
36.7 faults / 100 tests
Year avg: 36.3 / 100 tests
Equipment
▼ 74.1% worse
14.1 faults / 100 tests
Year avg: 8.1 / 100 tests
Other
▲ 4.0% better
31.0 faults / 100 tests
Year avg: 32.3 / 100 tests
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 183
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 143
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 108
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 83
Significant brake effort recorded with no brake applied indicating a binding brake
ADVISORY
Occurrences: 79
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 78
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 76
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 73
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 72
A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
MINOR
Occurrences: 68
Serious faults (Top 10)
Parking brake efficiency: below minimum requirement
FAIL
Occurrences: 35
Parking brake inoperative on one side, or in the case of testing on the road, the vehicle deviates excessively from a straight line
FAIL
Occurrences: 32
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 27
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 26
A direction indicator: lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning
FAIL
Occurrences: 25
Significant brake effort recorded with no brake applied indicating a binding brake
FAIL
Occurrences: 24
Brake lining or pad: worn below 1.5mm
FAIL
Occurrences: 24
Stop lamp(s): all missing or inoperative
FAIL
Occurrences: 19
Parking brake efficiency: less than 50% of the required value
FAIL
Occurrences: 19
A suspension joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 16