Skip to main content

Bmw 730 - 2013

106.1 faults per 100 tests
Year average for all cars of 2013 is 221.9 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Bmw 730, model year 2013. Sample size: 457 cars, 1,017 tests and 1,079 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 457 cars

The 2013 BMW 730 has an overall defect rate of 106 per 100 vehicles, significantly lower than the average of 219 per 100, representing a 52% improvement. This model performs particularly well in categories such as brakes and steering, where it shows a remarkable reduction in defects compared to the yearly averages. Notably, the 730 also excels in visibility and lights & electrics, with much lower defect rates. While tire wear is a common issue across all vehicles, the BMW 730's performance in other critical areas suggests a solid reliability compared to its peers.

Cars by mileage segment

Total: 457 cars

Categories

Brakes
▲ 65.7% better
33.8 faults / 100 tests
Year avg: 98.4 / 100 tests
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Excessive fluctuation in brake effort through each wheel revolution
  • Brake pipe damaged or excessively corroded
  • Brake lining or pad: worn below 1.5mm
  • Brake disc or drum: significantly and obviously worn
Steering
▲ 78.3% better
2.8 faults / 100 tests
Year avg: 12.9 / 100 tests
  • A steering ball joint: with excessive wear or free play
  • A steering ball joint: with excessive wear or free play
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • A steering ball joint: with excessive wear or free play
  • Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
Visibility
▲ 26.7% better
13.2 faults / 100 tests
Year avg: 18.0 / 100 tests
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Wiper blade: missing or obviously not clearing the windscreen
  • Obligatory mirror or device: slightly damaged or loose
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
Lights & Electrics
▲ 88.6% better
5.7 faults / 100 tests
Year avg: 50.1 / 100 tests
  • The aim of a headlamp is not within limits laid down in the requirements
  • Lamp: multiple light source up to a half not functioning
  • A headlamp: missing, inoperative or more than ½ not functioning in the case of LED
  • Headlamp cleaning device: inoperative in the case of LED or gas discharge systems (HID)
  • A headlamp: missing, inoperative or more than ½ not functioning in the case of LED
Wheels & Suspension
▲ 35.9% better
140.8 faults / 100 tests
Year avg: 219.6 / 100 tests
  • Tyre tread depth not in accordance with the requirements
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A suspension pin, bush, joint or bearing: excessively worn
  • A suspension pin, bush, joint or bearing: excessively worn
Body/Structure
▲ 77.5% better
4.5 faults / 100 tests
Year avg: 20.0 / 100 tests
  • A transmission shaft flexible coupling: excessively deteriorated
  • A transmission shaft constant velocity joint boot: severely deteriorated
  • A transmission shaft flexible coupling: excessively deteriorated
  • Fuel system: leaking, or missing or ineffective filler cap
  • Bumper: insecure or with damage likely to cause injury when grazed or contacted
Equipment
▲ 57.7% better
2.2 faults / 100 tests
Year avg: 5.2 / 100 tests
  • Seat belt buckle missing, damaged or not functioning as intended
  • A seat belt: webbing or flexible stalk significantly stretched or weakened
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • A seat belt:
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
Other
▲ 53.1% better
9.2 faults / 100 tests
Year avg: 19.6 / 100 tests
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Engine MIL inoperative or indicating a malfunction
  • Emissions test not completed because smoke levels are significantly in excess of the specified limit values
  • Engine MIL inoperative or indicating a malfunction
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users

Fault rate by mileage segment

Model    Year average
0 379 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 265
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 130
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 73
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 53
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 44
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 43
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 43
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 39
Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
MINOR
Occurrences: 37
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 30

Serious faults (Top 10)

A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 43
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 39
A spring: or spring component fractured or seriously weakened
FAIL
Occurrences: 30
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 30
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
FAIL
Occurrences: 16
Any fracture or welding defect on a wheel
FAIL
Occurrences: 16
A suspension joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 9
A wheel: with a loose or missing wheel nut, bolt or stud
FAIL
Occurrences: 9
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 9
Parking brake efficiency: below minimum requirement
FAIL
Occurrences: 5