Bmw 420 - 2016
Less faults compared to the average car of same model year
Quick summary
The 2016 BMW 420 demonstrates a significantly lower overall defect rate compared to the average car from the same year, with 103 defects per 100 vehicles versus 151 defects per 100 vehicles, representing a 32% improvement. Notably, this model shows a concerning increase in defects as mileage increases, especially beyond 124,000 miles, where the rate reaches 261 defects per 100. However, the BMW 420 excels in several key areas, particularly in brakes and steering, where it has 34% and 55% fewer defects than average, respectively. Additionally, categories such as visibility and lights & electrics also show notably fewer issues compared to the average vehicle. Overall, the BMW 420 stands out for its reliability in several critical areas despite the higher mileage-related defect trend.
Cars by mileage segment
More model years for Bmw 420
Other models from Bmw
Categories
- Brake lining or pad: worn below 1.5mm
- Brake disc or drum: significantly and obviously worn
- Excessive fluctuation in brake effort through each wheel revolution
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake lining or pad: worn below 1.5mm
- A steering ball joint: with excessive wear or free play
- A steering ball joint: with excessive wear or free play
- Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
- Free play in the steering, measured at the rim of the steering wheel is: excessive
- Steering rack gaiter or ball joint dust cover: damaged or deteriorated
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
- Wiper blade: defective
- Wiper blade: missing or obviously not clearing the windscreen
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- A headlamp: missing, inoperative or more than ½ not functioning in the case of LED
- The aim of a headlamp is not within limits laid down in the requirements
- The aim of a headlamp is not within limits laid down in the requirements
- A direction indicator: lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning
- A headlamp: missing, inoperative or more than ½ not functioning in the case of LED
- A suspension pin, bush, joint or bearing: excessively worn
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- Tyre tread depth not in accordance with the requirements
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- A shock absorber damaged … or showing signs of severe leakage
- Exhaust system has a major leak or is insecure
- A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
- Exhaust system has a major leak or is insecure
- A transmission shaft constant velocity joint boot: severely deteriorated
- A transmission shaft flexible coupling: excessively deteriorated
- Seat belt buckle missing, damaged or not functioning as intended
- A seat belt: webbing or flexible stalk significantly stretched or weakened
- A seat belt:
- Audible warning:
- An SRS malfunction indicator lamp (MIL) indicates a system malfunction
- Smoke opacity levels exceed the manufacturer’s specified limit
- Engine MIL inoperative or indicating a malfunction
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- Engine MIL inoperative or indicating a malfunction
- Any part of the noise suppression system: insecure