Skip to main content

Bmw 320 - 2022

49.8 faults per 100 tests
Year average for all cars of 2022 is 71.1 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Bmw 320, model year 2022. Sample size: 2,684 cars, 3,616 tests and 1,802 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 2,684 cars

The 2022 BMW 320 demonstrates a significantly lower overall defect rate, with 50 defects per 100 vehicles compared to the average of 70, marking a 29% improvement. Notably, the vehicle excels in several key areas, particularly in brakes, where it has a defect rate of just 11%, well below the average of 30%. It also performs better than average in steering, visibility, and lights and electrics, with much lower defect percentages than typical for its year. Mileage trends indicate that the defect rate increases with mileage, but the BMW 320 shows a relatively stable performance across lower mileage segments compared to the average. Overall, this model stands out as a reliable choice with fewer defects in several critical safety categories.

Cars by mileage segment

Total: 2,684 cars

Categories

Brakes
▲ 64.7% better
11.0 faults / 100 tests
Year avg: 31.2 / 100 tests
  • Brake lining or pad: worn below 1.5mm
  • Brake disc or drum: significantly and obviously worn
  • Brake lining or pad: worn below 1.5mm
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Brake lining or pad: worn below 1.5mm
Steering
▲ 25.0% better
0.3 faults / 100 tests
Year avg: 0.4 / 100 tests
  • Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • A steering ball joint: with excessive wear or free play
Visibility
▲ 61.6% better
4.8 faults / 100 tests
Year avg: 12.5 / 100 tests
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • An obstruction: materially affecting the driver’s view of the road through the swept area of the windscreen or an obligatory external mirror not visible
  • Wiper blade: defective
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
Lights & Electrics
▲ 55.0% better
4.9 faults / 100 tests
Year avg: 10.9 / 100 tests
  • A direction indicator: lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning
  • A direction indicator: lamp with a multiple light source up to 1/2 not functioning
  • The aim of a headlamp is not within limits laid down in the requirements
  • The aim of a headlamp is not within limits laid down in the requirements
  • Manual levelling device cannot be operated from the driver’s seat
Wheels & Suspension
▲ 6.8% better
76.4 faults / 100 tests
Year avg: 82.0 / 100 tests
  • Tyre tread depth not in accordance with the requirements
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
Body/Structure
▲ 81.3% better
0.3 faults / 100 tests
Year avg: 1.6 / 100 tests
  • A transmission shaft constant velocity joint boot: severely deteriorated
  • A body panel or body component: damaged or corroded and likely to cause injury when grazed or contacted, or insecure
  • A body panel or body component: damaged or corroded and likely to cause injury when grazed or contacted, or insecure
  • A transmission shaft flexible coupling: excessively deteriorated
  • A transmission shaft bearing housing: likely to fail
Equipment
▲ 38.5% better
0.8 faults / 100 tests
Year avg: 1.3 / 100 tests
  • Seat belt buckle missing, damaged or not functioning as intended
  • ESC MIL indicates a system malfunction
  • A seat belt:
  • Seat belt buckle missing, damaged or not functioning as intended
  • A statutory seat belt missing
Other
▲ 47.6% better
1.1 faults / 100 tests
Year avg: 2.1 / 100 tests
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Engine MIL inoperative or indicating a malfunction
  • Engine MIL inoperative or indicating a malfunction
  • Lambda coefficient outside the default limits or the range specified by the manufacturer
  • Engine MIL inoperative or indicating a malfunction

Fault rate by mileage segment

Model    Year average
0 260 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 587
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 290
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 129
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 129
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
FAIL
Occurrences: 110
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
ADVISORY
Occurrences: 107
The aim of a headlamp is not within limits laid down in the requirements
PRS
Occurrences: 72
Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
MINOR
Occurrences: 53
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 40
A wheel: badly distorted or wear between wheel and hub at spigot mounting
ADVISORY
Occurrences: 34

Serious faults (Top 10)

A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 129
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
FAIL
Occurrences: 110
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 40
Brake lining or pad: worn below 1.5mm
FAIL
Occurrences: 12
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 12
A direction indicator: lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning
FAIL
Occurrences: 7
Engine MIL inoperative or indicating a malfunction
FAIL
Occurrences: 6
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 5
A wheel: with a loose or missing wheel nut, bolt or stud
FAIL
Occurrences: 5
The aim of a headlamp is not within limits laid down in the requirements
FAIL
Occurrences: 4