Skip to main content

Bmw 316 - 2011

224.7 faults per 100 tests
Year average for all cars of 2011 is 274.4 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Bmw 316, model year 2011. Sample size: 235 cars, 498 tests and 1,119 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 235 cars

The 2011 BMW 316 has an overall defect rate of 225 per 100 vehicles, which is 17% lower than the average for cars of the same year, at 271 per 100. Notably, this model performs significantly better in categories such as steering and lights & electrics, with defects at just 1.2% and 45.4%, respectively, compared to the average of 14.8% and 67.9%. While the defect rate increases with mileage, especially in the 93,000 to 124,000-mile range, the BMW maintains a relatively lower incidence of issues compared to its peers, indicating a reliable performance as the vehicle ages. Overall, this model excels in several key areas, making it a commendable choice among its contemporaries.

Cars by mileage segment

Total: 235 cars

Categories

Brakes
▼ 8.2% worse
118.9 faults / 100 tests
Year avg: 109.9 / 100 tests
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Brake disc or drum: significantly and obviously worn
  • Significant brake effort recorded with no brake applied indicating a binding brake
  • Brake lining or pad: worn below 1.5mm
  • Brake pipe damaged or excessively corroded
Steering
▲ 92.4% better
1.2 faults / 100 tests
Year avg: 15.8 / 100 tests
  • Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
  • Excessive wear or play in a universal joint or a flexible coupling excessively deteriorated
Visibility
▼ 6.1% worse
22.5 faults / 100 tests
Year avg: 21.2 / 100 tests
  • Obligatory mirror or device: slightly damaged or loose
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Wiper blade: missing or obviously not clearing the windscreen
  • Windscreen or window excessively tinted: but not adversely affecting driver’s view
Lights & Electrics
▲ 34.1% better
45.4 faults / 100 tests
Year avg: 68.9 / 100 tests
  • A headlamp: missing, inoperative or more than ½ not functioning in the case of LED
  • The aim of a headlamp is not within limits laid down in the requirements
  • Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
  • Lamp: multiple light source up to a half not functioning
  • The aim of a headlamp is not within limits laid down in the requirements
Wheels & Suspension
▲ 22.1% better
207.6 faults / 100 tests
Year avg: 266.4 / 100 tests
  • Tyre tread depth not in accordance with the requirements
  • A suspension pin, bush, joint or bearing: excessively worn
  • A spring: or spring component fractured or seriously weakened
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A shock absorber damaged … or showing signs of severe leakage
Body/Structure
▲ 29.4% better
22.1 faults / 100 tests
Year avg: 31.3 / 100 tests
  • Exhaust system has a major leak or is insecure
  • Exhaust system has a major leak or is insecure
  • A transmission shaft constant velocity joint boot: severely deteriorated
  • A transmission shaft flexible coupling: excessively deteriorated
  • Fuel system: leaking, or missing or ineffective filler cap
Equipment
▲ 40.5% better
4.4 faults / 100 tests
Year avg: 7.4 / 100 tests
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • ESC MIL indicates a system malfunction
  • Audible warning:
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • Seat belt buckle missing, damaged or not functioning as intended
Other
▲ 1.8% better
27.3 faults / 100 tests
Year avg: 27.8 / 100 tests
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Engine MIL inoperative or indicating a malfunction
  • Exhaust emits excessive smoke or vapour of any colour to an extent likely to obscure the vision of other road users
  • Smoke opacity levels exceed the manufacturer’s specified limit

Fault rate by mileage segment

Model    Year average
0 421 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 201
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 60
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 59
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 57
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 54
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 53
A shock absorber damaged … or showing signs of severe leakage
ADVISORY
Occurrences: 52
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 27
Brake disc or drum: significantly and obviously worn
ADVISORY
Occurrences: 27
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 27

Serious faults (Top 10)

Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 24
A shock absorber damaged … or showing signs of severe leakage
FAIL
Occurrences: 21
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 15
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 14
Parking brake efficiency: below minimum requirement
FAIL
Occurrences: 10
A headlamp: missing, inoperative or more than ½ not functioning in the case of LED
FAIL
Occurrences: 9
Brake lining or pad: worn below 1.5mm
FAIL
Occurrences: 9
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 8
Significant brake effort recorded with no brake applied indicating a binding brake
FAIL
Occurrences: 8
The aim of a headlamp is not within limits laid down in the requirements
FAIL
Occurrences: 7