Skip to main content

Bmw 316 - 2009

279.5 faults per 100 tests
Year average for all cars of 2009 is 311.0 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Bmw 316, model year 2009. Sample size: 122 cars, 264 tests and 738 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 122 cars

The 2009 BMW 316 has an overall defect rate of 280 per 100 vehicles, which is 10% lower than the average for cars of the same year. This model shows particularly strong performance in categories like Steering, where its defect rate is significantly lower than average, and it also fares better in Lights & Electrics and Body/Structure. However, it appears to have no specific standout issues compared to the average vehicle, indicating generally reliable maintenance. As mileage increases, defects tend to rise, particularly in the higher mileage segments, consistent with trends observed in other vehicles.

Cars by mileage segment

Total: 122 cars

Categories

Brakes
▼ 14.1% worse
134.1 faults / 100 tests
Year avg: 117.5 / 100 tests
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Brake hose ferrules: excessively corroded
  • Brake lining or pad: worn below 1.5mm
  • Brake pipe damaged or excessively corroded
  • Brake disc or drum: significantly and obviously worn
Steering
▲ 67.5% better
5.3 faults / 100 tests
Year avg: 16.3 / 100 tests
  • Free play in the steering, measured at the rim of the steering wheel is: excessive
  • Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • A steering ball joint: with excessive wear or free play
Visibility
▲ 12.4% better
20.5 faults / 100 tests
Year avg: 23.4 / 100 tests
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Obligatory mirror or device: slightly damaged or loose
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Wiper blade: missing or obviously not clearing the windscreen
Lights & Electrics
▲ 44.7% better
44.7 faults / 100 tests
Year avg: 80.9 / 100 tests
  • Lamp: multiple light source up to a half not functioning
  • Stop lamp(s): all missing or inoperative
  • Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
  • Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
  • Stop lamp(s): all missing or inoperative
Wheels & Suspension
▲ 2.0% better
293.9 faults / 100 tests
Year avg: 299.8 / 100 tests
  • A suspension pin, bush, joint or bearing: excessively worn
  • A suspension component: excessively damaged or corroded
  • Tyre tread depth not in accordance with the requirements
  • A shock absorber damaged … or showing signs of severe leakage
  • A suspension pin, bush, joint or bearing: excessively worn
Body/Structure
▲ 41.7% better
24.2 faults / 100 tests
Year avg: 41.5 / 100 tests
  • A transmission shaft flexible coupling: excessively deteriorated
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • A transmission shaft constant velocity joint boot: severely deteriorated
  • Exhaust system has a major leak or is insecure
  • Exhaust system has a major leak or is insecure
Equipment
▲ 26.5% better
6.1 faults / 100 tests
Year avg: 8.3 / 100 tests
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • A seat belt: webbing or flexible stalk significantly stretched or weakened
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • ESC MIL indicates a system malfunction
Other
▲ 11.9% better
30.3 faults / 100 tests
Year avg: 34.4 / 100 tests
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Engine MIL inoperative or indicating a malfunction
  • Engine MIL inoperative or indicating a malfunction
  • Emissions test unable to be completed
  • Exhaust emits excessive smoke or vapour of any colour to an extent likely to obscure the vision of other road users

Fault rate by mileage segment

Model    Year average
0 454 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 106
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 73
A shock absorber damaged … or showing signs of severe leakage
ADVISORY
Occurrences: 66
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 42
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 32
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 23
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 21
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 17
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 14
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 14

Serious faults (Top 10)

A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 17
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 14
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 14
A wheel: with a loose or missing wheel nut, bolt or stud
FAIL
Occurrences: 13
A shock absorber damaged … or showing signs of severe leakage
FAIL
Occurrences: 8
Parking brake efficiency: below minimum requirement
FAIL
Occurrences: 8
Parking brake efficiency: less than 50% of the required value
FAIL
Occurrences: 5
Significant brake effort recorded with no brake applied indicating a binding brake
FAIL
Occurrences: 5
Warning device shows system malfunction
FAIL
Occurrences: 4
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
FAIL
Occurrences: 4