Skip to main content

Bmw 316 - 2004

352.1 faults per 100 tests
Year average for all cars of 2004 is 384.6 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Bmw 316, model year 2004. Sample size: 663 cars, 1,368 tests and 4,817 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 663 cars

The 2004 BMW 316 has a defect rate of 352 per 100 vehicles, which is 8% lower than the average for cars of the same year. While tyre wear is a common issue across many vehicles, this model stands out for its significantly lower rates of defects in steering, visibility, and lights and electrics. However, it performs worse than average in brake-related issues and other defects, with notably higher rates. Mileage trends indicate that defects increase with age, particularly after 93,000 miles, aligning with general patterns observed in older vehicles.

Cars by mileage segment

Total: 663 cars

Categories

Brakes
▼ 29.5% worse
212.6 faults / 100 tests
Year avg: 164.2 / 100 tests
  • Brake pipe damaged or excessively corroded
  • Brake lining or pad: worn below 1.5mm
  • Brake hose ferrules: excessively corroded
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
Steering
▲ 83.5% better
4.1 faults / 100 tests
Year avg: 24.9 / 100 tests
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • Power steering fluid leaking or system malfunctioning
  • A steering ball joint: with excessive wear or free play
  • A steering ball joint: with excessive wear or free play
  • Free play in the steering, measured at the rim of the steering wheel is: excessive
Visibility
▲ 22.5% better
22.7 faults / 100 tests
Year avg: 29.3 / 100 tests
  • Wiper blade: missing or obviously not clearing the windscreen
  • Wiper blade: missing or obviously not clearing the windscreen
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Wiper blade: defective
Lights & Electrics
▲ 51.3% better
53.5 faults / 100 tests
Year avg: 109.9 / 100 tests
  • Lamp emitted colour, position or intensity not in accordance with the requirements
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
  • Beam image obviously incorrect
  • Headlamp reflector or lens: slightly defective
  • Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
Wheels & Suspension
▲ 19.0% better
253.5 faults / 100 tests
Year avg: 312.9 / 100 tests
  • A suspension pin, bush, joint or bearing: excessively worn
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A suspension pin, bush, joint or bearing: excessively worn
  • Tyre tread depth not in accordance with the requirements
  • A spring: or spring component fractured or seriously weakened
Body/Structure
▲ 57.7% better
26.9 faults / 100 tests
Year avg: 63.6 / 100 tests
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • Fuel system: leaking, or missing or ineffective filler cap
  • Exhaust system has a major leak or is insecure
  • Exhaust system has a major leak or is insecure
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
Equipment
▲ 16.7% better
11.5 faults / 100 tests
Year avg: 13.8 / 100 tests
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • ESC MIL indicates a system malfunction
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
Other
▼ 136.4% worse
119.4 faults / 100 tests
Year avg: 50.5 / 100 tests
  • Emissions levels exceed default limits
  • Exhaust emits excessive dense blue or clearly visible black smoke during acceleration which would obscure the view of other road users
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Emissions levels exceed the manufacturer’s specified limits
  • Lambda coefficient outside the default limits or the range specified by the manufacturer

Fault rate by mileage segment

Model    Year average
0 533 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 505
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 414
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 371
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 322
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 318
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 276
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 140
Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
ADVISORY
Occurrences: 133
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 110
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 94

Serious faults (Top 10)

A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 88
Emissions levels exceed default limits
FAIL
Occurrences: 64
Emissions levels exceed the manufacturer’s specified limits
FAIL
Occurrences: 59
Brake pipe damaged or excessively corroded
FAIL
Occurrences: 51
A suspension joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 49
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 47
Parking brake efficiency: below minimum requirement
FAIL
Occurrences: 40
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 33
Engine MIL inoperative or indicating a malfunction
FAIL
Occurrences: 32
Wiper blade: missing or obviously not clearing the windscreen
FAIL
Occurrences: 28