Skip to main content

Bmw 316 - 2002

332.5 faults per 100 tests
Year average for all cars of 2002 is 375.3 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Bmw 316, model year 2002. Sample size: 407 cars, 810 tests and 2,693 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 407 cars

The 2002 BMW 316 has an overall defect rate of 332 per 100 vehicles, which is 11% lower than the average for cars of the same year. This model shows particularly strong performance in categories like steering, where it has significantly fewer defects compared to the average, and in wheels, suspensions, and axles, which also reflects a lower defect rate. However, it stands out negatively in the "Other" category, where its defect rate is over double that of the average. Mileage trends indicate that defect rates increase with mileage, but the BMW 316 performs better than average in the lower mileage segments.

Cars by mileage segment

Total: 407 cars

Categories

Brakes
▼ 4.3% worse
174.1 faults / 100 tests
Year avg: 167.0 / 100 tests
  • Brake pipe damaged or excessively corroded
  • Brake lining or pad: worn below 1.5mm
  • Brake hose ferrules: excessively corroded
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
Steering
▲ 79.4% better
5.2 faults / 100 tests
Year avg: 25.3 / 100 tests
  • Free play in the steering, measured at the rim of the steering wheel is: excessive
  • Power steering fluid leaking or system malfunctioning
  • A steering ball joint: with excessive wear or free play
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
Visibility
▲ 9.1% better
26.9 faults / 100 tests
Year avg: 29.6 / 100 tests
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Wiper blade: missing or obviously not clearing the windscreen
  • Wiper blade: defective
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Obligatory mirror or device: slightly damaged or loose
Lights & Electrics
▲ 19.8% better
77.0 faults / 100 tests
Year avg: 96.0 / 100 tests
  • Lamp emitted colour, position or intensity not in accordance with the requirements
  • Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
  • The aim of a headlamp is not within limits laid down in the requirements
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
  • Beam image obviously incorrect
Wheels & Suspension
▲ 23.4% better
226.2 faults / 100 tests
Year avg: 295.2 / 100 tests
  • Tyre tread depth not in accordance with the requirements
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A suspension pin, bush, joint or bearing: excessively worn
  • A suspension pin, bush, joint or bearing: excessively worn
  • A spring: or spring component fractured or seriously weakened
Body/Structure
▲ 54.4% better
31.4 faults / 100 tests
Year avg: 68.9 / 100 tests
  • Exhaust system has a major leak or is insecure
  • Exhaust system has a major leak or is insecure
  • Body, cab or chassis: excessively corroded at mounting points
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • Fuel system: leaking, or missing or ineffective filler cap
Equipment
▲ 8.7% better
13.6 faults / 100 tests
Year avg: 14.9 / 100 tests
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • ESC MIL indicates a system malfunction
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
Other
▼ 106.3% worse
110.6 faults / 100 tests
Year avg: 53.6 / 100 tests
  • Exhaust emits excessive dense blue or clearly visible black smoke during acceleration which would obscure the view of other road users
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Emissions levels exceed default limits
  • Emissions levels exceed the manufacturer’s specified limits

Fault rate by mileage segment

Model    Year average
0 537 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 331
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 215
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 208
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 205
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 156
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 104
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 94
Lamp emitted colour, position or intensity not in accordance with the requirements
ADVISORY
Occurrences: 73
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 64
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 58

Serious faults (Top 10)

A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 55
Parking brake efficiency: below minimum requirement
FAIL
Occurrences: 27
An SRS malfunction indicator lamp (MIL) indicates a system malfunction
FAIL
Occurrences: 23
A suspension joint dust cover: missing or no longer prevents the ingress of dirt etc.
FAIL
Occurrences: 22
Beam image obviously incorrect
FAIL
Occurrences: 21
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 20
Wiper blade: missing or obviously not clearing the windscreen
FAIL
Occurrences: 18
Brake pipe damaged or excessively corroded
FAIL
Occurrences: 18
Emissions levels exceed default limits
FAIL
Occurrences: 17
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
FAIL
Occurrences: 14