Skip to main content

Bmw 316 - 1999

370.6 faults per 100 tests
Year average for all cars of 1999 is 349.1 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Bmw 316, model year 1999. Sample size: 262 cars, 551 tests and 2,042 recorded faults.
0%
More faults compared to the average car of same model year

Quick summary

Total: 262 cars

The 1999 BMW 316 has an overall defect rate of 371 per 100 vehicles, which is 7.5% higher than the average for cars of the same year. Notably, this model performs better in categories related to visibility, lights and electrics, and equipment, with significantly lower defect rates compared to the average. However, it has a higher incidence of brake issues and miscellaneous defects. Mileage trends indicate that defect rates generally increase with higher mileage, but the BMW 316 exhibits a particularly sharp rise in defects starting from the 93,000-mile segment.

Cars by mileage segment

Total: 262 cars

Categories

Brakes
▼ 30.6% worse
200.4 faults / 100 tests
Year avg: 153.4 / 100 tests
  • Brake pipe damaged or excessively corroded
  • Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
  • Brake hose ferrules: excessively corroded
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Brake lining or pad: worn below 1.5mm
Steering
▲ 8.9% better
23.6 faults / 100 tests
Year avg: 25.9 / 100 tests
  • A steering ball joint: with excessive wear or free play
  • Free play in the steering, measured at the rim of the steering wheel is: excessive
  • Power steering fluid leaking or system malfunctioning
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
Visibility
▲ 22.2% better
20.7 faults / 100 tests
Year avg: 26.6 / 100 tests
  • Wiper blade: missing or obviously not clearing the windscreen
  • Obligatory mirror or device: slightly damaged or loose
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Wiper blade: defective
Lights & Electrics
▲ 42.3% better
42.1 faults / 100 tests
Year avg: 73.0 / 100 tests
  • The aim of a headlamp is not within limits laid down in the requirements
  • Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
  • Beam image obviously incorrect
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
  • Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
Wheels & Suspension
▼ 4.3% worse
278.4 faults / 100 tests
Year avg: 266.9 / 100 tests
  • A suspension pin, bush, joint or bearing: excessively worn
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A suspension component: excessively damaged or corroded
  • Tyre tread depth not in accordance with the requirements
  • The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
Body/Structure
▲ 2.7% better
74.4 faults / 100 tests
Year avg: 76.5 / 100 tests
  • Exhaust system has a major leak or is insecure
  • 6.1.1 (d) (i)
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • Body, cab or chassis: excessively corroded at mounting points
Equipment
▲ 41.1% better
11.3 faults / 100 tests
Year avg: 19.2 / 100 tests
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • Seat belt buckle missing, damaged or not functioning as intended
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
Other
▼ 60.0% worse
90.4 faults / 100 tests
Year avg: 56.5 / 100 tests
  • Emissions levels exceed default limits
  • Emissions test unable to be completed
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Lambda coefficient outside the default limits or the range specified by the manufacturer
  • Emissions levels exceed the manufacturer’s specified limits

Fault rate by mileage segment

Model    Year average
0 538 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 197
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 187
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 173
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 135
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 98
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 89
Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
ADVISORY
Occurrences: 85
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
ADVISORY
Occurrences: 73
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
ADVISORY
Occurrences: 66
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 65

Serious faults (Top 10)

A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 45
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 23
An SRS malfunction indicator lamp (MIL) indicates a system malfunction
FAIL
Occurrences: 19
Emissions levels exceed default limits
FAIL
Occurrences: 17
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
FAIL
Occurrences: 15
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 13
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 12
A spring: or spring component fractured or seriously weakened
FAIL
Occurrences: 10
Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
FAIL
Occurrences: 10
Parking brake efficiency: below minimum requirement
FAIL
Occurrences: 9