Skip to main content

Bmw 316 - 1993

422.1 faults per 100 tests
Year average for all cars of 1993 is 301.0 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Bmw 316, model year 1993. Sample size: 107 cars, 204 tests and 861 recorded faults.
0%
More faults compared to the average car of same model year

Quick summary

Total: 107 cars

The 1993 BMW 316 has a significantly higher overall defect rate of 422 per 100 vehicles compared to the average of 300 per 100 vehicles, representing a 41% increase. This model particularly struggles with brake issues, showing a defect rate of 227 per 100, which is 91% higher than the average. Additionally, it has notable challenges in categories such as wheels, suspensions, and axles, where the defect rate reaches 275 per 100, significantly surpassing the average. Interestingly, while tyre wear is present, the most critical concerns for this model stem from its braking and visibility systems. Overall, as mileage increases, defects become more pronounced, especially in the higher mileage categories.

Cars by mileage segment

Total: 107 cars

Categories

Brakes
▼ 96.1% worse
227.5 faults / 100 tests
Year avg: 116.0 / 100 tests
  • Brake pipe damaged or excessively corroded
  • Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
  • Brake lining or pad: worn below 1.5mm
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Brake pipe: inadequately clipped or supported
Steering
▲ 11.0% better
27.5 faults / 100 tests
Year avg: 30.9 / 100 tests
  • Power steering fluid leaking or system malfunctioning
  • Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
  • Power steering fluid: level below minimum mark
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • Power steering fluid leaking or system malfunctioning
Visibility
▼ 19.5% worse
29.4 faults / 100 tests
Year avg: 24.6 / 100 tests
  • Wiper blade: missing or obviously not clearing the windscreen
  • Wiper blade: defective
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Wiper not operating or missing
Lights & Electrics
▼ 35.0% worse
96.1 faults / 100 tests
Year avg: 71.2 / 100 tests
  • Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
  • A registration plate lamp: not securely attached
  • Stop lamp(s): all missing or inoperative
  • The aim of a headlamp is not within limits laid down in the requirements
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
Wheels & Suspension
▼ 45.1% worse
275.5 faults / 100 tests
Year avg: 189.9 / 100 tests
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
  • A suspension pin, bush, joint or bearing: excessively worn
  • A spring: or spring component fractured or seriously weakened
  • Tyre tread depth not in accordance with the requirements
Body/Structure
▼ 17.3% worse
95.1 faults / 100 tests
Year avg: 81.1 / 100 tests
  • Exhaust system has a major leak or is insecure
  • A transmission shaft constant velocity joint boot: severely deteriorated
  • 6.1.1 (d) (i)
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • Exhaust system has a major leak or is insecure
Equipment
▲ 4.8% better
21.6 faults / 100 tests
Year avg: 22.7 / 100 tests
  • A seat belt: or flexible stalk damaged
  • A seat belt: or flexible stalk damaged
  • is significantly reduced or The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a ’prescribed area’): inadequately repaired
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • Seat belt buckle missing, damaged or not functioning as intended
Other
▼ 8.0% worse
70.6 faults / 100 tests
Year avg: 65.4 / 100 tests
  • Emissions levels exceed default limits
  • Emissions levels exceed the manufacturer’s specified limits
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Lambda coefficient outside the default limits or the range specified by the manufacturer
  • Emission control equipment fitted by the manufacturer: missing, obviously modified or obviously defective

Fault rate by mileage segment

Model    Year average
0 724 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 98
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 72
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 51
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 47
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 42
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 33
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 29
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
ADVISORY
Occurrences: 29
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
ADVISORY
Occurrences: 23
A transmission shaft constant velocity joint boot: severely deteriorated
MINOR
Occurrences: 17

Serious faults (Top 10)

The aim of a headlamp is not within limits laid down in the requirements
FAIL
Occurrences: 15
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 11
Emissions levels exceed default limits
FAIL
Occurrences: 11
Exhaust system has a major leak or is insecure
FAIL
Occurrences: 7
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 7
Wiper blade: missing or obviously not clearing the windscreen
FAIL
Occurrences: 7
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 7
Parking brake inoperative on one side, or in the case of testing on the road, the vehicle deviates excessively from a straight line
FAIL
Occurrences: 5
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 5
Parking brake efficiency: below minimum requirement
FAIL
Occurrences: 5