Skip to main content

Bmw 220 - 2020

67.1 faults per 100 tests
Year average for all cars of 2020 is 91.3 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Bmw 220, model year 2020. Sample size: 1,988 cars, 4,305 tests and 2,890 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 1,988 cars

The 2020 BMW 220 has an overall defect rate of 67 per 100 vehicles, which is significantly lower than the average of 90 defects per 100 vehicles for cars of the same year, representing a 25% improvement. This model particularly excels in several categories, including brakes, steering, visibility, and body structure, where it shows much fewer defects compared to the average vehicle. While the defect rates rise with mileage, the BMW 220 performs better in the lower mileage ranges, specifically under 31,000 miles, which indicates strong initial reliability. Overall, this model stands out for its low defects in critical safety and structural areas.

Cars by mileage segment

Total: 1,988 cars

Categories

Brakes
▲ 47.6% better
26.6 faults / 100 tests
Year avg: 50.8 / 100 tests
  • Brake lining or pad: worn below 1.5mm
  • Brake disc or drum: significantly and obviously worn
  • Excessive fluctuation in brake effort through each wheel revolution
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Brake lining or pad: worn below 1.5mm
Steering
▲ 80.0% better
0.3 faults / 100 tests
Year avg: 1.5 / 100 tests
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • Steering
  • Excessive radial movement between the top of the steering column and the shaft indicating an excessively worn top bearing
  • Free play in the steering, measured at the rim of the steering wheel is: excessive
  • A steering ball joint: with excessive wear or free play
Visibility
▲ 57.4% better
6.0 faults / 100 tests
Year avg: 14.1 / 100 tests
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Wiper blade: defective
  • Wiper blade: missing or obviously not clearing the windscreen
Lights & Electrics
▲ 53.6% better
5.2 faults / 100 tests
Year avg: 11.2 / 100 tests
  • The aim of a headlamp is not within limits laid down in the requirements
  • Stop lamp(s): all missing or inoperative
  • A direction indicator: lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning
  • The aim of a headlamp is not within limits laid down in the requirements
  • Stop lamp(s): all missing or inoperative
Wheels & Suspension
▲ 5.1% better
92.5 faults / 100 tests
Year avg: 97.5 / 100 tests
  • Tyre tread depth not in accordance with the requirements
  • A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
Body/Structure
▲ 70.8% better
0.7 faults / 100 tests
Year avg: 2.4 / 100 tests
  • An engine mounting or bracket: severely damaged or deteriorated resulting in excessive movement
  • An engine mounting or bracket: severely damaged or deteriorated resulting in excessive movement
  • A body panel or body component: damaged or corroded and likely to cause injury when grazed or contacted, or insecure
  • A door will not open using the relevant control or close properly
  • Fuel system: leaking, or missing or ineffective filler cap
Equipment
▲ 40.0% better
0.9 faults / 100 tests
Year avg: 1.5 / 100 tests
  • A seat belt: webbing or flexible stalk significantly stretched or weakened
  • Seat belt buckle missing, damaged or not functioning as intended
  • Seat belt buckle missing, damaged or not functioning as intended
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • A seat belt:
Other
▲ 45.9% better
2.0 faults / 100 tests
Year avg: 3.7 / 100 tests
  • Engine MIL inoperative or indicating a malfunction
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Engine MIL inoperative or indicating a malfunction
  • Engine MIL inoperative or indicating a malfunction
  • Lambda coefficient outside the default limits or the range specified by the manufacturer

Fault rate by mileage segment

Model    Year average
0 273 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 880
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 509
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 307
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
ADVISORY
Occurrences: 160
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 134
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
FAIL
Occurrences: 124
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 101
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 75
Brake disc or drum: significantly and obviously worn
ADVISORY
Occurrences: 68
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 64

Serious faults (Top 10)

A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
FAIL
Occurrences: 124
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 101
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 64
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 19
Engine MIL inoperative or indicating a malfunction
FAIL
Occurrences: 15
Brake lining or pad: worn below 1.5mm
FAIL
Occurrences: 14
The aim of a headlamp is not within limits laid down in the requirements
FAIL
Occurrences: 11
Brake lining or pad: worn down to wear indicator
FAIL
Occurrences: 10
Engine MIL inoperative or indicating a malfunction
FAIL
Occurrences: 9
Any fracture or welding defect on a wheel
FAIL
Occurrences: 8