Skip to main content

Bmw 116 - 2006

355.0 faults per 100 tests
Year average for all cars of 2006 is 371.9 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Bmw 116, model year 2006. Sample size: 2,898 cars, 6,162 tests and 21,873 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 2,898 cars

The 2006 BMW 116 has an overall defect rate of 355 defects per 100 vehicles, which is slightly better than the yearly average of 369 defects per 100 vehicles, representing a 3.8% improvement. This model shows particularly strong performance in categories like Steering and Body/Structure, with defect rates significantly lower than average. However, it struggles with Brakes and Other defects, where its rates are notably higher than the average for its year. Mileage trends indicate that defect rates increase with mileage, especially in the higher categories, reflecting typical wear patterns.

Cars by mileage segment

Total: 2,898 cars

Categories

Brakes
▼ 61.5% worse
248.8 faults / 100 tests
Year avg: 154.1 / 100 tests
  • Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Brake hose ferrules: excessively corroded
  • Brake pipe damaged or excessively corroded
  • Brake lining or pad: worn below 1.5mm
Steering
▲ 63.4% better
7.4 faults / 100 tests
Year avg: 20.2 / 100 tests
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • A steering ball joint: with excessive wear or free play
  • A steering ball joint: with excessive wear or free play
  • Power steering fluid leaking or system malfunctioning
  • Free play in the steering, measured at the rim of the steering wheel is: excessive
Visibility
▼ 18.1% worse
32.7 faults / 100 tests
Year avg: 27.7 / 100 tests
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Obligatory mirror or device: slightly damaged or loose
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Wiper blade: missing or obviously not clearing the windscreen
Lights & Electrics
▲ 28.0% better
80.0 faults / 100 tests
Year avg: 111.1 / 100 tests
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
  • Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
  • Beam image obviously incorrect
  • Lamp emitted colour, position or intensity not in accordance with the requirements
  • Headlamp reflector or lens: slightly defective
Wheels & Suspension
▲ 20.5% better
249.9 faults / 100 tests
Year avg: 314.5 / 100 tests
  • A suspension pin, bush, joint or bearing: excessively worn
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • Tyre tread depth not in accordance with the requirements
  • A suspension component: excessively damaged or corroded
  • A shock absorber damaged … or showing signs of severe leakage
Body/Structure
▲ 72.6% better
16.3 faults / 100 tests
Year avg: 59.5 / 100 tests
  • Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
  • Exhaust system has a major leak or is insecure
  • Exhaust system has a major leak or is insecure
  • Fuel system: leaking, or missing or ineffective filler cap
  • A transmission shaft constant velocity joint boot: severely deteriorated
Equipment
▲ 34.7% better
7.7 faults / 100 tests
Year avg: 11.8 / 100 tests
  • Seat belt buckle missing, damaged or not functioning as intended
  • ESC MIL indicates a system malfunction
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
Other
▼ 50.3% worse
67.2 faults / 100 tests
Year avg: 44.7 / 100 tests
  • Engine MIL inoperative or indicating a malfunction
  • Engine MIL inoperative or indicating a malfunction
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Exhaust emits excessive dense blue or clearly visible black smoke during acceleration which would obscure the view of other road users
  • Emissions levels exceed the manufacturer’s specified limits

Fault rate by mileage segment

Model    Year average
0 513 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
ADVISORY
Occurrences: 2,762
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 2,103
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 1,357
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 1,073
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 1,006
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 947
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 915
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 908
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 683
A shock absorber damaged … or showing signs of severe leakage
ADVISORY
Occurrences: 592

Serious faults (Top 10)

Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
FAIL
Occurrences: 276
Engine MIL inoperative or indicating a malfunction
FAIL
Occurrences: 245
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 234
A shock absorber damaged … or showing signs of severe leakage
FAIL
Occurrences: 222
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 214
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 168
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 126
Brake lining or pad: worn below 1.5mm
FAIL
Occurrences: 117
Beam image obviously incorrect
FAIL
Occurrences: 113
Lamp emitted colour, position or intensity not in accordance with the requirements
FAIL
Occurrences: 107