Bentley BENTAYGA - 2019
30.3 faults per 100 tests
Year average for all cars of 2019 is 108.6 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Bentley BENTAYGA, model year 2019.
Sample size: 598 cars, 1,579 tests and 479 recorded faults.
0%
Less faults compared to the average car of same model year
Less faults compared to the average car of same model year
Quick summary
Total: 598 cars
The 2019 Bentley Bentayga exhibits a significantly lower overall defect rate, with 30 defects reported per 100 vehicles, compared to the average of 106 defects for cars of the same year, marking a 71% improvement. This model shows fewer issues particularly in the categories of brakes, steering, visibility, lights and electrics, where it performs much better than average. No defects were found in the steering category, and its brake issues are minimal at just 10%. However, as mileage increases, defect rates rise, especially in the higher mileage brackets. Overall, the Bentayga stands out positively for its reliability compared to its peers.
Cars by mileage segment
Total: 598 cars
More model years for Bentley BENTAYGA
Other models from Bentley
Categories
Brakes
▲ 83.5% better
10.3 faults / 100 tests
Year avg: 62.4 / 100 tests
- Brake lining or pad: worn below 1.5mm
- Brake disc or drum: insecure, fractured or otherwise likely to fail
Steering
▲ 100.0% better
0.0 faults / 100 tests
Year avg: 2.8 / 100 tests
Visibility
▲ 76.1% better
3.3 faults / 100 tests
Year avg: 13.8 / 100 tests
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
Lights & Electrics
▲ 89.9% better
1.5 faults / 100 tests
Year avg: 14.9 / 100 tests
- The aim of a headlamp is not within limits laid down in the requirements
Wheels & Suspension
▲ 60.8% better
44.3 faults / 100 tests
Year avg: 112.9 / 100 tests
- Tyre tread depth not in accordance with the requirements
- A suspension pin, bush, joint or bearing: excessively worn
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
- A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
Body/Structure
▲ 97.1% better
0.1 faults / 100 tests
Year avg: 3.5 / 100 tests
Equipment
▲ 94.4% better
0.1 faults / 100 tests
Year avg: 1.8 / 100 tests
Other
▲ 80.4% better
1.0 faults / 100 tests
Year avg: 5.1 / 100 tests
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 120
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 78
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 74
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 58
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
ADVISORY
Occurrences: 53
Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
MINOR
Occurrences: 16
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 16
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
FAIL
Occurrences: 7
A wheel: badly distorted or wear between wheel and hub at spigot mounting
ADVISORY
Occurrences: 7
The aim of a headlamp is not within limits laid down in the requirements
PRS
Occurrences: 7
Serious faults (Top 10)
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
FAIL
Occurrences: 7
Any fracture or welding defect on a wheel
FAIL
Occurrences: 3
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 3
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 3
Emissions levels exceed default limits
FAIL
Occurrences: 2
Emissions levels exceed the manufacturer’s specified limits
FAIL
Occurrences: 2
Lamp emitted colour, position or intensity not in accordance with the requirements
FAIL
Occurrences: 2
Emission control equipment fitted by the manufacturer: missing, obviously modified or obviously defective
FAIL
Occurrences: 2
Wiper blade: missing or obviously not clearing the windscreen
FAIL
Occurrences: 1
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 1